EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

First Attempt at Electropolishing 18-Karat Jewelry’s Gold Alloys Using Eutectic Solvents Based on Choline Chloride

J. Rodriguez, J.-Y. Hihn, M.-L. Doche

Journal of The Electrochemical Society · 14.04.2026 · 173 (7) · 073505

DOI: 10.1149/1945-7111/ae584b ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of The Electrochemical Society, online erschienen am 14.04.2026. Verfasst von J. Rodriguez und 2 weiteren Autor:innen. Die Arbeit nennt 64 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: French Ministry for Higher Education, Research and Innovation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Electropolishing is a surface finishing process used to smooth and brighten metallic surfaces, particularly effective for complex geometries and faster than mechanical polishing. In the case of precious metals, conventional electropolishing relies on electrolytes containing cyanides and other hazardous chemicals, which restricts its industrial use. Consequently, alternative, safer solutions are being explored. Deep Eutectic Solvents (DES) have recently gained attention as environmentally friendlier media for the chemical and electrochemical dissolution of valuable metals such as gold, silver, and copper. Despite this potential, their application to the electropolishing of precious metal alloys has not yet been thoroughly studied. This work focuses on evaluating choline chloride–based DES, specifically Glyceline (ChCl-EG (1:2)) and Propeline (ChCl-PPD (1:2)), for the electropolishing of 18 K gold alloys in yellow, red, and gray compositions. To enable meaningful comparison, a reference system for surface roughness and brightness was developed using mechanically polished samples. The results show that electropolishing in these DES can achieve surface qualities comparable to mechanical polishing with fine abrasives of 3 μm and 1 μm. The solvents are assessed based on their effectiveness in reducing roughness, increasing brightness, and maintaining color uniformity. Additionally, Power Spectral Density analysis of surface roughness profiles is proposed to better understand the underlying electropolishing mechanisms.

Förderung

  • French Ministry for Higher Education, Research and Innovation

Zitieren

APA

Rodriguez, J., Hihn, J., & Doche, M. (2026). First Attempt at Electropolishing 18-Karat Jewelry’s Gold Alloys Using Eutectic Solvents Based on Choline Chloride. Journal of The Electrochemical Society, 173(7), 073505. https://doi.org/10.1149/1945-7111/ae584b

Vancouver

Rodriguez J, Hihn J, Doche M. First Attempt at Electropolishing 18-Karat Jewelry’s Gold Alloys Using Eutectic Solvents Based on Choline Chloride. Journal of The Electrochemical Society. 2026;173(7):073505. doi:10.1149/1945-7111/ae584b

BibTeX
@article{Rodriguez2026,
  author = {Rodriguez, J. and Hihn, J.-Y. and Doche, M.-L.},
  title = {First Attempt at Electropolishing 18-Karat Jewelry’s Gold Alloys Using Eutectic Solvents Based on Choline Chloride},
  journal = {Journal of The Electrochemical Society},
  year = {2026},
  volume = {173},
  number = {7},
  pages = {073505},
  doi = {10.1149/1945-7111/ae584b}
}
Kostenlos starten →