EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

From Laboratory to Application – Differences between Small and Large Battery Cells

Thomas Waldmann, Alessandro Innocenti, Vanessa Scheck, Katharina Bischof, Rebecca Valerie Feser, Philipp Moosmann, Michael Kasper, Mario Marinaro, Alice Hoffmann, Margret Wohlfahrt-Mehrens, Rares-George Scurtu, Ilona Jipa und 2 weitere

Journal of The Electrochemical Society · 13.03.2026 · 173 (5) · 050501

DOI: 10.1149/1945-7111/ae46e4 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of The Electrochemical Society, online erschienen am 03.03.2026. Verfasst von Thomas Waldmann und 13 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 279 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Bundesministerium für Bildung und Forschung.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The development of batteries with new materials typically starts with small active material amounts and consequently with small cells, often with low-loaded electrodes. As development progresses to increasing technology readiness levels, mid-sized and large cells with thicker electrode coatings are mandatory. However, large cells have different electrochemical and physicochemical properties than small lab cells. Herein, we discuss similarities and especially differences in the behavior of small laboratory cells (e.g. coin) and larger cells (cylindrical, pouch, prismatic), regarding cell design, electrode thickness, specific energy on material and cell level, heating behavior due to current flow, impedance, voltage curves, and rate capability. Impedances at 1 kHz are reduced by three orders of magnitude from coin cells to large cells while heating power is increased by a factor of 10 2 to 10 5 . By comparing specific capacities on cathode material level with those on cell level for commercial cells, we find a reduction by a factor of ∼3 to ∼5, depending on the anode coating thickness. The large general gap from pure material to cell and between small laboratory, mid-sized, large pilot, and commercial cells need to be taken into account from the beginning of battery development to avoid potential misinterpretation.

Förderung

  • Bundesministerium für Bildung und Forschung

Zitieren

APA

Waldmann, T., Innocenti, A., Scheck, V., Bischof, K., Feser, R. V., Moosmann, P., Kasper, M., Marinaro, M., Hoffmann, A., Wohlfahrt-Mehrens, M., Scurtu, R., Jipa, I., Axmann, P., & Hölzle, M. (2026). From Laboratory to Application – Differences between Small and Large Battery Cells. Journal of The Electrochemical Society, 173(5), 050501. https://doi.org/10.1149/1945-7111/ae46e4

Vancouver

Waldmann T, Innocenti A, Scheck V, Bischof K, Feser RV, Moosmann P, et al. From Laboratory to Application – Differences between Small and Large Battery Cells. Journal of The Electrochemical Society. 2026;173(5):050501. doi:10.1149/1945-7111/ae46e4

BibTeX
@article{Waldmann2026,
  author = {Waldmann, Thomas and Innocenti, Alessandro and Scheck, Vanessa and Bischof, Katharina and Feser, Rebecca Valerie and Moosmann, Philipp and Kasper, Michael and Marinaro, Mario and Hoffmann, Alice and Wohlfahrt-Mehrens, Margret and Scurtu, Rares-George and Jipa, Ilona and Axmann, Peter and Hölzle, Markus},
  title = {From Laboratory to Application – Differences between Small and Large Battery Cells},
  journal = {Journal of The Electrochemical Society},
  year = {2026},
  volume = {173},
  number = {5},
  pages = {050501},
  doi = {10.1149/1945-7111/ae46e4}
}
Kostenlos starten →