Investigation of Debris Removal Mechanism in Ultrasonic-Assisted Electrochemical Discharge Machining
Journal of The Electrochemical Society · 01.06.2025 · 172 (6) · 063505
DOI: 10.1149/1945-7111/ade293 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of The Electrochemical Society, online erschienen am 18.06.2025. Verfasst von Anurag Shanu und 1 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 49 Literaturangaben.
Abstract (Originalsprache)
Electrochemical discharge machining (ECDM) is widely used for fabricating microfeatures on brittle and non-conducting materials such as glass; however, inadequate electrolyte replenishment and debris accumulation in deep microhole drilling (>300 μm) hinder its machining performance. Ultrasonic-assisted electrochemical discharge machining (UA-ECDM) has emerged to improve electrolyte circulation and debris evacuation, thereby enhancing the machining depth. This investigation explores the influence of ultrasonic tool vibration on electrolyte flow dynamics, debris removal, and machining performance through a combined numerical and experimental approach. A 3D numerical simulation was performed to analyze electrolyte flow velocity distribution and debris movement at various vibration amplitudes. The results indicate that ultrasonic vibration doubled the electrolyte velocity and increased the debris removal efficiency by 50%. The experimental observations confirmed that ultrasonic vibration increases hole depth by 33% and improves the aspect ratio by 16% compared to conventional ECDM. High-speed imaging, current-time signals, and EDS analysis revealed that UA-ECDM minimizes debris deposition and ensures uniform discharge distribution, reducing tool wear and improving process stability. Additionally, multiple high- aspect ratio (2.5) through-holes were fabricated in a 1.1 mm thick glass substrate using a multi-tip tool electrode in UA-ECDM.
Zitieren
APA
Shanu, A., & Dixit, P. (2025). Investigation of Debris Removal Mechanism in Ultrasonic-Assisted Electrochemical Discharge Machining. Journal of The Electrochemical Society, 172(6), 063505. https://doi.org/10.1149/1945-7111/ade293
Vancouver
Shanu A, Dixit P. Investigation of Debris Removal Mechanism in Ultrasonic-Assisted Electrochemical Discharge Machining. Journal of The Electrochemical Society. 2025;172(6):063505. doi:10.1149/1945-7111/ade293
BibTeX
@article{Shanu2025,
author = {Shanu, Anurag and Dixit, Pradeep},
title = {Investigation of Debris Removal Mechanism in Ultrasonic-Assisted Electrochemical Discharge Machining},
journal = {Journal of The Electrochemical Society},
year = {2025},
volume = {172},
number = {6},
pages = {063505},
doi = {10.1149/1945-7111/ade293}
}
EUVIMED