Impact of Testing Method on Safety Assessment of Aged Li-ion Cells: Part I – Li Plating as Main Aging Mechanism
Journal of The Electrochemical Society · 01.03.2025 · 172 (3) · 030502
DOI: 10.1149/1945-7111/adb804 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of The Electrochemical Society, online erschienen am 04.03.2025. Verfasst von Gabriela G. Gerosa und 9 weiteren Autor:innen. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 104 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Bundesministerium für Bildung und Forschung, Bundesministerium für Wirtschaft und Klimaschutz.
Abstract (Originalsprache)
Extending the lifetime of lithium-ion batteries is essential to maximize resource efficiency and minimize environmental impact. Therefore, understanding the aging mechanisms that batteries undergo in their first life is critical to ensure safe operation in second-life applications. This study focuses on a comprehensive safety assessment of commercial 18650-type lithium-ion batteries with graphite||NCA chemistry. The safety of aged cells with the aging mechanism of lithium plating was tested using thermal (ARC), electrical (overcurrent, overcharge, overdischarge), and mechanical (nail penetration) abuse tests. New cells without lithium plating serve as control samples for comparison of the different safety test types and for the cells with lithium plating. The presence and absence of lithium plating is confirmed by electrochemical tests and Post-Mortem analyses (SEM, GD-OES). The cells with lithium plating exhibit significantly lower onset of self-heating temperatures, a tendency to higher maximum thermal runaway temperatures and increased EUCAR hazard levels. The results highlight potential hazards associated with lithium plating in lithium-ion batteries and the necessity to detect and avoid lithium plating in first life in order to safely reuse them in second life applications. This is part one of two papers dealing with safety testing aspects of aged cells with different degradation mechanisms.
Förderung
- Bundesministerium für Bildung und Forschung
- Bundesministerium für Wirtschaft und Klimaschutz
Zitieren
APA
Gerosa, G. G., Feinauer, M., Hogrefe, C., Häfele, S., Bischof, K., Wörz, M., Böse, O., Wohlfahrt-Mehrens, M., Hölzle, M., & Waldmann, T. (2025). Impact of Testing Method on Safety Assessment of Aged Li-ion Cells: Part I – Li Plating as Main Aging Mechanism. Journal of The Electrochemical Society, 172(3), 030502. https://doi.org/10.1149/1945-7111/adb804
Vancouver
Gerosa GG, Feinauer M, Hogrefe C, Häfele S, Bischof K, Wörz M, et al. Impact of Testing Method on Safety Assessment of Aged Li-ion Cells: Part I – Li Plating as Main Aging Mechanism. Journal of The Electrochemical Society. 2025;172(3):030502. doi:10.1149/1945-7111/adb804
BibTeX
@article{Gerosa2025,
author = {Gerosa, Gabriela G. and Feinauer, Max and Hogrefe, Christin and Häfele, Samuel and Bischof, Katharina and Wörz, Michael and Böse, Olaf and Wohlfahrt-Mehrens, Margret and Hölzle, Markus and Waldmann, Thomas},
title = {Impact of Testing Method on Safety Assessment of Aged Li-ion Cells: Part I – Li Plating as Main Aging Mechanism},
journal = {Journal of The Electrochemical Society},
year = {2025},
volume = {172},
number = {3},
pages = {030502},
doi = {10.1149/1945-7111/adb804}
}
EUVIMED