EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Alkaline Water Electrolysis Beyond 3 A/cm 2 Using Catalyst Coated Diaphragms

Maximilian Demnitz, John van der Schaaf, Matheus Theodorus de Groot

Journal of The Electrochemical Society · 01.01.2025 · 172 (1) · 014504

DOI: 10.1149/1945-7111/ada581 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of The Electrochemical Society, online erschienen am 14.01.2025. Verfasst von Maximilian Demnitz und 2 weiteren Autor:innen. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Commission.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Alkaline water electrolysis using catalyst coated diaphragms (Zirfon UTP 500 and UTP 220) was conducted at current densities from 2 up to 3500 mA cm −2 at varying temperatures (20–75 °C) in 30 wt% KOH. The coatings were conducted using two different approaches, which were compared with each other: spray coating and stencil coating. Using platinum group free catalysts, which are either available commercially or easy to synthesize (Raney Ni; FeNi LDH), we reached 3.5 A cm −2 at less than 2.3 or 2.5 V, for Zirfon UTP 220 and 500, respectively. The improvements compared to conventional Ni felt were linked to a reduction in the kinetic overpotential due to better catalytic properties and an increase in active surface area. The internal resistance corrected potential at 1 A cm −2 was as low as 1.75 V (at 75 °C), showing that high current operation for industrial alkaline water electrolysers is possible, when ohmic resistances are adequately addressed. The catalyst coated diaphragms were stable under room temperature for at least 60 h, however, showed degradation at 75 °C over the course of up to 240 h. The catalyst layers degraded by fracturing followed by delamination to the porous transport layer, where they showed elongated stability.

Förderung

  • European Commission

Zitieren

APA

Demnitz, M., Schaaf, J. V. D., & Groot, M. T. D. (2025). Alkaline Water Electrolysis Beyond 3 A/cm 2 Using Catalyst Coated Diaphragms. Journal of The Electrochemical Society, 172(1), 014504. https://doi.org/10.1149/1945-7111/ada581

Vancouver

Demnitz M, Schaaf JVD, Groot MTD. Alkaline Water Electrolysis Beyond 3 A/cm 2 Using Catalyst Coated Diaphragms. Journal of The Electrochemical Society. 2025;172(1):014504. doi:10.1149/1945-7111/ada581

BibTeX
@article{Demnitz2025,
  author = {Demnitz, Maximilian and Schaaf, John van der and Groot, Matheus Theodorus de},
  title = {Alkaline Water Electrolysis Beyond 3 A/cm 2 Using Catalyst Coated Diaphragms},
  journal = {Journal of The Electrochemical Society},
  year = {2025},
  volume = {172},
  number = {1},
  pages = {014504},
  doi = {10.1149/1945-7111/ada581}
}
Kostenlos starten →