Modeling Structured Electrodes and Graded Porosity for Improving Discharge Rate Capability in Ultra-Thick Graphite|LiNi 0.6 Mn 0.2 Co 0.2 O 2 Batteries
Journal of The Electrochemical Society · 01.01.2025 · 172 (1) · 010513
DOI: 10.1149/1945-7111/ada4e0 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of The Electrochemical Society, online erschienen am 20.01.2025. Verfasst von Chih-Hsuan Hung und 2 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 76 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: UT-Battelle, Oak Ridge Institute for Science and Education, Advanced Materials and Manufacturing Technologies Office.
Abstract (Originalsprache)
Long-range electric vehicles (EVs) require high-energy-density batteries that also meet the power demands of high current charge and discharge. Ultra-thick (>100 μm) Lithium-ion battery electrodes are critical to enable this need, but slow ion transport in conventional uniform electrodes (UEs) reduces battery capacity at increasing charge/discharge rates. We present a 3D computational analysis on the impact of structured electrode (SE) and graded electrode (GE) geometries on the discharge rate capability of ultra-thick graphite|LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC-622) battery cells based on the footprint of a commercial EV pouch cell. SE cathodes with either a “grid” or “line” geometry and GEs with two layers of porosity were modeled. Based on the results of 230 models, we found that the electrolyte volume fraction is a key parameter that impacts capacity improvements in UEs, GEs, and SEs at 2 C–6 C discharge rates. SEs have the greatest discharge rate capability, outperforming GEs and UEs due to reduced Lithium-ion concentration gradients across the electrode thickness, which mitigates electrolyte depletion at high rates. The best SE model has a “grid” geometry with gravimetric and volumetric energy density improvements of 0.9%–4% at C/2–2 C and 18%–24% at 4 C–6 C relative to UEs.
Förderung
- UT-Battelle
- Oak Ridge Institute for Science and Education
- Advanced Materials and Manufacturing Technologies Office
- The Electrochemical Society Pacific Northwest section
Zitieren
APA
Hung, C., Allu, S., & Cobb, C. L. (2025). Modeling Structured Electrodes and Graded Porosity for Improving Discharge Rate Capability in Ultra-Thick Graphite|LiNi 0.6 Mn 0.2 Co 0.2 O 2 Batteries. Journal of The Electrochemical Society, 172(1), 010513. https://doi.org/10.1149/1945-7111/ada4e0
Vancouver
Hung C, Allu S, Cobb CL. Modeling Structured Electrodes and Graded Porosity for Improving Discharge Rate Capability in Ultra-Thick Graphite|LiNi 0.6 Mn 0.2 Co 0.2 O 2 Batteries. Journal of The Electrochemical Society. 2025;172(1):010513. doi:10.1149/1945-7111/ada4e0
BibTeX
@article{Hung2025,
author = {Hung, Chih-Hsuan and Allu, Srikanth and Cobb, Corie L.},
title = {Modeling Structured Electrodes and Graded Porosity for Improving Discharge Rate Capability in Ultra-Thick Graphite|LiNi 0.6 Mn 0.2 Co 0.2 O 2 Batteries},
journal = {Journal of The Electrochemical Society},
year = {2025},
volume = {172},
number = {1},
pages = {010513},
doi = {10.1149/1945-7111/ada4e0}
}
EUVIMED