Simulated Start-Stop and the Impact of Catalyst Layer Redox on Degradation and Performance Loss in Low-Temperature Electrolysis
Journal of The Electrochemical Society · 01.04.2024 · 171 (4) · 044503
DOI: 10.1149/1945-7111/ad2bea ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of The Electrochemical Society, online erschienen am 08.04.2024. Verfasst von Shaun M. Alia und 7 weiteren Autor:innen. Die Arbeit wurde bisher 34-mal zitiert (Crossref) und nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Stress tests are developed that focus on anode catalyst layer degradation in proton exchange membrane electrolysis due to simulated start-stop operation. Ex situ testing indicates that repeated redox cycling accelerates catalyst dissolution, due to near-surface reduction and the higher dissolution kinetics of metals when cycling to high potentials. Similar results occur in situ, where a large decrease in cell kinetics (>70%) is found along with iridium migrating from the anode catalyst layer into the membrane. Additional processes are observed, however, including changes in iridium oxidation, the formation of thinner and denser catalyst layers, and platinum migration from the transport layer. Increased interfacial weakening is also found, adding to both ohmic and kinetic loss by adding contact resistances and isolating portions of the catalyst layer. Repeated shutoffs of the water flow further accelerate performance loss and increase the frequency of tearing and delamination at interfaces and within catalyst layers. These tests were applied to several commercial catalysts, where higher loss rates were observed for catalysts that contained ruthenium or high metal content. These results demonstrate the need to understand how operational stops occur, to identify how loss mechanisms are accelerated, and to develop strategies to limit performance loss.
Zitieren
APA
Alia, S. M., Reeves, K. S., Cullen, D. A., Yu, H., Kropf, A. J., Kariuki, N., Park, J. H., & Myers, D. J. (2024). Simulated Start-Stop and the Impact of Catalyst Layer Redox on Degradation and Performance Loss in Low-Temperature Electrolysis. Journal of The Electrochemical Society, 171(4), 044503. https://doi.org/10.1149/1945-7111/ad2bea
Vancouver
Alia SM, Reeves KS, Cullen DA, Yu H, Kropf AJ, Kariuki N, et al. Simulated Start-Stop and the Impact of Catalyst Layer Redox on Degradation and Performance Loss in Low-Temperature Electrolysis. Journal of The Electrochemical Society. 2024;171(4):044503. doi:10.1149/1945-7111/ad2bea
BibTeX
@article{Alia2024,
author = {Alia, Shaun M. and Reeves, Kimberly S. and Cullen, David A. and Yu, Haoran and Kropf, A. Jeremy and Kariuki, Nancy and Park, Jae Hyung and Myers, Deborah J.},
title = {Simulated Start-Stop and the Impact of Catalyst Layer Redox on Degradation and Performance Loss in Low-Temperature Electrolysis},
journal = {Journal of The Electrochemical Society},
year = {2024},
volume = {171},
number = {4},
pages = {044503},
doi = {10.1149/1945-7111/ad2bea}
}
EUVIMED