EUVIMEDEUVIMED entdecken
Crossref

Very Low Temperature Tensile and Selective Si:P Epitaxy for Advanced CMOS Devices

Joël Kanyandekwe, Matthias Bauer, Tanguy Marion, Lazhar Saidi, Jean-Baptiste Pin, Jeremie Bisserier, Jérôme Richy, Nicolas Gauthier, Pattamon Dezest, Laurent Brunet, Valérie Lapras, Tristan Dewolf und 2 weitere

ECS Transactions · 30.09.2022 · 109 (4) · 121-133

DOI: 10.1149/10904.0121ecst ↗

Kurz gefasst

Fachartikel in der Zeitschrift ECS Transactions, erschienen am 30.09.2022. Verfasst von Joël Kanyandekwe und 13 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

We demonstrate the feasibility of selectively growing highly doped and tensile-strained Si:P layers at temperatures 500°C or less on each side of advanced n-type MOS devices. To that end, we used a Cyclic Deposition Etch (CDE) strategy instead of a conventional “co-flow” approach fit for the high temperature (> 600°C) Selective Epitaxial Growth (SEG) of t-SiP films. A high order silicon precursor was used together with PH 3 to benefit from high t-Si:P growth rates at 500°C and less. Selective etchings were performed with Cl 2 as an etchant gas, as it yielded much higher etch rates than HCl. We first investigated the blanket growth of t-SiP on fullsheet Si wafers. 5 to 15 times higher higher growth rates than with standard precursors were obtained at low temperatures with our new HOS silicon precursor. We then investigated the etching efficiency of Cl 2 , with several tens of nanometers per minutes etch rates achieved at very low temperatures. Using a CDE strategy, we then probed phosphorus incorporation in blanket t-Si:P films on fullsheet wafers. High quality and smooth t-SiP layers with up to 5.4%, 4.3% and 5.8% of P and sheet resistances as low as 0.33, 0.27 and 0.21 mohm.cm were obtained at 500°C, 475°C and 450°C, respectively. We then tested our CDE SiP process for SEG, first on test structures then on each side of real FD-SOI devices, with smooth, high quality, tensile SiP layers grown at 500°C with 4.5% of P.

Zitieren

APA

Kanyandekwe, J., Bauer, M., Marion, T., Saidi, L., Pin, J., Bisserier, J., Richy, J., Gauthier, N., Dezest, P., Brunet, L., Lapras, V., Dewolf, T., Thomas, S., & Hartmann, J. (2022). Very Low Temperature Tensile and Selective Si:P Epitaxy for Advanced CMOS Devices. ECS Transactions, 109(4), 121-133. https://doi.org/10.1149/10904.0121ecst

Vancouver

Kanyandekwe J, Bauer M, Marion T, Saidi L, Pin J, Bisserier J, et al. Very Low Temperature Tensile and Selective Si:P Epitaxy for Advanced CMOS Devices. ECS Transactions. 2022;109(4):121-133. doi:10.1149/10904.0121ecst

BibTeX
@article{Kanyandekwe2022,
  author = {Kanyandekwe, Joël and Bauer, Matthias and Marion, Tanguy and Saidi, Lazhar and Pin, Jean-Baptiste and Bisserier, Jeremie and Richy, Jérôme and Gauthier, Nicolas and Dezest, Pattamon and Brunet, Laurent and Lapras, Valérie and Dewolf, Tristan and Thomas, Shawn and Hartmann, Jean-Michel},
  title = {Very Low Temperature Tensile and Selective Si:P Epitaxy for Advanced CMOS Devices},
  journal = {ECS Transactions},
  year = {2022},
  volume = {109},
  number = {4},
  pages = {121--133},
  doi = {10.1149/10904.0121ecst}
}
Kostenlos starten →