EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A 950 MHz SIMT Soft Processor

Martin Langhammer, Gregg Baeckler, Kim Bozman

ACM Transactions on Reconfigurable Technology and Systems · 30.09.2026 · 19 (3) · 1-33

DOI: 10.1145/3811540 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACM Transactions on Reconfigurable Technology and Systems, online erschienen am 12.08.2026. Verfasst von Martin Langhammer und 2 weiteren Autor:innen. Die Arbeit nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Although modern Field Programmable Gate Arrays (FPGAs) have a performance potential of a 1 GHz clock frequency—with both clock networks and embedded blocks such as memories and DSP Blocks capable of these clock rates—user implementations approaching this speed are rarely realized in practice. This is especially true of complex designs such as soft processors. This work is based on a soft Single Instruction, Multiple Thread (SIMT) processor that exceeds 950 MHz in an Altera Agilex-7 FPGA. The architecture is a 32-bit fixed-point SIMT design, with parameterized thread and register spaces. Up to 4,096 threads and 64 K registers can be specified by the user. In one example, a processor with 16 K registers and a 16KB shared memory required approximately 7 K ALMs, 99 M20K memories, and 32 DSP Blocks. We then use this processor as the basis of a multi-processor system that can serve as a foundation for a soft System-on-a-Chip (SoC) design. Creating a parallel processor that can reliably close timing at near 1 GHz requires more than just deep pipelining, or assembling high-speed constituent components. The architecture of the datapaths must take the structure of the routing networks into consideration so that no buses contain wires with significantly different distances. Likewise, the implementation of a densely packed multi-processor system cannot simply be the stacking of several high-performance cores, but rather finding a solution that uses the combination of functional and routing resources most efficiently. In this work, we achieve this goal using multiple trials around a calculated starting point. This work is presented in two separate, but related parts. First, we describe RTL-based methods to approach 1 GHz timing closure for complex processors by creating structures that map naturally to the pre-defined architecture of the FPGA. These performance levels can be achieved without any placement or timing constraints. Secondly, we use the Altera FPGA tools for design space exploration to create dense arrays of these processors while maintaining the resource density (relative footprint) and clock performance of the single instance. In one example, we create a 30-processor structure, comprising three 10-core clusters, that closes timing at over 930 MHz while consuming only about 30% of a mid-range FPGA. These processor clusters are entirely contained within bounding boxes, leaving the surrounding logic and routing completely untouched. Ultimately, this work is intended to enable the design of soft systems—where software and hardware approaches can be combined in an FPGA context.

Zitieren

APA

Langhammer, M., Baeckler, G., & Bozman, K. (2026). A 950 MHz SIMT Soft Processor. ACM Transactions on Reconfigurable Technology and Systems, 19(3), 1-33. https://doi.org/10.1145/3811540

Vancouver

Langhammer M, Baeckler G, Bozman K. A 950 MHz SIMT Soft Processor. ACM Transactions on Reconfigurable Technology and Systems. 2026;19(3):1-33. doi:10.1145/3811540

BibTeX
@article{Langhammer2026,
  author = {Langhammer, Martin and Baeckler, Gregg and Bozman, Kim},
  title = {A 950 MHz SIMT Soft Processor},
  journal = {ACM Transactions on Reconfigurable Technology and Systems},
  year = {2026},
  volume = {19},
  number = {3},
  pages = {1--33},
  doi = {10.1145/3811540}
}
Kostenlos starten →