EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Co-Optimization of Structure and Manufacturable Semi-Continuous Layers for Laminated Composites

Tao Liu, Aoran Lyu, Yongxue Chen, Yu Jiang, Michael James Petty, Charlie C. L. Wang

ACM Transactions on Graphics · 03.07.2026 · 45 (4) · 1-16

DOI: 10.1145/3811393 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACM Transactions on Graphics, online erschienen am 03.07.2026. Verfasst von Tao Liu und 5 weiteren Autor:innen. Die Arbeit nennt 88 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Engineering and Physical Sciences Research Council, Chair Professorship Fund at the University of Manchester.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To enable the design and manufacturing of optimized composite structures using fabric plies, we propose a field-driven optimization framework that jointly optimizes structural topology and manufacturable layers. A central challenge in this setting is the modeling and optimization of partial fabric layers with near-uniform thickness, which we formulate as a semi-continuous periodic scalar field parameterized by a continuous implicit neural vector field. Within this concurrent structure-layer optimization framework, we further derive a formulation of inter-layer anisotropic mechanical behavior that enables effective modeling of mechanical property transitions induced by partial-layer boundaries, together with additional objectives for manufacturability and field regularization. We validate the effectiveness of our approach through both numerical simulations and physical experiments, demonstrating that the optimized fabric-reinforced laminated composites achieve up to 43.8% higher stiffness compared to counterparts fabricated using planar fabric plies.

Förderung

  • Engineering and Physical Sciences Research Council
  • Chair Professorship Fund at the University of Manchester

Zitieren

APA

Liu, T., Lyu, A., Chen, Y., Jiang, Y., Petty, M. J., & Wang, C. C. L. (2026). Co-Optimization of Structure and Manufacturable Semi-Continuous Layers for Laminated Composites. ACM Transactions on Graphics, 45(4), 1-16. https://doi.org/10.1145/3811393

Vancouver

Liu T, Lyu A, Chen Y, Jiang Y, Petty MJ, Wang CCL. Co-Optimization of Structure and Manufacturable Semi-Continuous Layers for Laminated Composites. ACM Transactions on Graphics. 2026;45(4):1-16. doi:10.1145/3811393

BibTeX
@article{Liu2026,
  author = {Liu, Tao and Lyu, Aoran and Chen, Yongxue and Jiang, Yu and Petty, Michael James and Wang, Charlie C. L.},
  title = {Co-Optimization of Structure and Manufacturable Semi-Continuous Layers for Laminated Composites},
  journal = {ACM Transactions on Graphics},
  year = {2026},
  volume = {45},
  number = {4},
  pages = {1--16},
  doi = {10.1145/3811393}
}
Kostenlos starten →