Measurement of the hydraulic properties of chalk using centrifuge permeameter; the study of chalk hydraulic properties under accelerated gravitational force
Quarterly Journal of Engineering Geology and Hydrogeology · 07.11.2022 · 55 (4)
DOI: 10.1144/qjegh2021-159 ↗Kurz gefasst
Fachartikel in der Zeitschrift Quarterly Journal of Engineering Geology and Hydrogeology, online erschienen am 16.05.2022. Verfasst von Peshawa Al-Jaf und 2 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
In this study, a geotechnical centrifuge has been used to study the unsaturated hydraulic properties of rock samples from the chalk aquifer, SE England. This method allows rapid measurement of hydraulic properties in a controlled environment, in contrast to previous studies on the chalk unsaturated zone, which required either an extended period (years) of data monitoring in the field or extended experimental periods (weeks) in the laboratory. Three types of specially built sensors were used to monitor water flow through chalk samples: a water pressure transducer to measure matric potential, frequency domain reflectometry probes to measure the volumetric water content and pressure transducers to measure the volume of water passing through the sample. Chalk samples were tested during wetting and draining processes to understand any hysteresis occurring during periodic recharge of the aquifer. Before undertaking physical tests of chalk samples in the centrifuge, a theoretical model of chalk hydraulic behaviour under centrifugal force was developed. This model was used to define and justify the instrumentation plan of the physical model and predict the shape of the soil moisture characteristic (SMC) curve and unsaturated hydraulic conductivity ( K u ) function. The results were then evaluated and compared with the experimental results. These results show that chalk samples can be successfully tested under centrifuge conditions and hydraulic properties can be measured, including soil moisture characteristic curves and hydraulic conductivity. Supplementary material: Calculation spread sheets are available at https://doi.org/10.17033/DATA.00000283
Zitieren
APA
Al-Jaf, P., Smith, M., & Gunzel, F. (2022). Measurement of the hydraulic properties of chalk using centrifuge permeameter; the study of chalk hydraulic properties under accelerated gravitational force. Quarterly Journal of Engineering Geology and Hydrogeology, 55(4). https://doi.org/10.1144/qjegh2021-159
Vancouver
Al-Jaf P, Smith M, Gunzel F. Measurement of the hydraulic properties of chalk using centrifuge permeameter; the study of chalk hydraulic properties under accelerated gravitational force. Quarterly Journal of Engineering Geology and Hydrogeology. 2022;55(4). doi:10.1144/qjegh2021-159
BibTeX
@article{AlJaf2022,
author = {Al-Jaf, Peshawa and Smith, Martin and Gunzel, Friederike},
title = {Measurement of the hydraulic properties of chalk using centrifuge permeameter; the study of chalk hydraulic properties under accelerated gravitational force},
journal = {Quarterly Journal of Engineering Geology and Hydrogeology},
year = {2022},
volume = {55},
number = {4},
doi = {10.1144/qjegh2021-159}
}
EUVIMED