Fracture length data for geothermal applications
Energy Geoscience Conference Series · 2026
DOI: 10.1144/egc1-2024-17 ↗Kurz gefasst
Fachartikel in der Zeitschrift Energy Geoscience Conference Series, 2026. Verfasst von Stephanie R. Forstner und 3 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 118 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Chemical Sciences, Geosciences, and Biosciences Division.
Abstract (Originalsprache)
Fracture lengths govern permeability and are unknowns in geothermal assessment. Along their lengths, fracture widths vary due to growth by linkage. Under the influence of diagenesis, narrow widths seal, breaking porosity continuity and reducing open length. The largest range of widths and thus susceptibility to fill occurs where fractures are linked by narrow segments. Outcrops of a geothermal target, Cambrian Potsdam quartz arenite, contain opening-mode fractures having lengths spanning five orders of magnitude from 0.082 mm to 17.9 m. Combined lengths measured at a range of scales can be described by power laws, but at a given image resolution, lengths are best fit by exponential functions. Owing to preferential sealing of small fractures, open fractures follow exponential functions, but values depend on rules for designating fractures as continuous. En échelon segments, offset 10 mm, are connected by narrow fractures or microfractures (hard linked) not evident on outcrop 1 m-elevation LiDAR or 30 m-height drone images. A rule that identifies where narrow and likely connected segments are located can yield lengths meaningful for flow simulation. Depending on diagenesis, continuity rules can halve or double average and maximum length values. Length values from outcrop for geothermal applications should be adjusted based on wellsite-specific diagenesis information.
Förderung
- Chemical Sciences, Geosciences, and Biosciences Division
Zitieren
APA
Forstner, S. R., Corrêa, R., Wang, Q., & Laubach, S. E. (2026). Fracture length data for geothermal applications. Energy Geoscience Conference Series. https://doi.org/10.1144/egc1-2024-17
Vancouver
Forstner SR, Corrêa R, Wang Q, Laubach SE. Fracture length data for geothermal applications. Energy Geoscience Conference Series. 2026. doi:10.1144/egc1-2024-17
BibTeX
@article{Forstner2026,
author = {Forstner, Stephanie R. and Corrêa, Rodrigo and Wang, Qiqi and Laubach, Stephen E.},
title = {Fracture length data for geothermal applications},
journal = {Energy Geoscience Conference Series},
year = {2026},
doi = {10.1144/egc1-2024-17}
}
EUVIMED