Evaluation of Mineral Melting in Drop Tube Furnace for Copper Smelting
Journal of Sustainable Materials Science and Engineering · 2026-01 · 02
DOI: 10.1142/s3060892925500041 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Sustainable Materials Science and Engineering, online erschienen am 10.06.2026. Verfasst von Nobuyasu Nishioka und 2 weiteren Autor:innen. Die Arbeit nennt 69 Literaturangaben. Gefördert von: Japan Society for the Promotion of Science.
Abstract (Originalsprache)
The global requirement for carbon neutrality is increasing copper demand, which requires efficient smelting with deteriorated raw materials. In copper flash smelting, sulfide minerals and flux oxidize rapidly (ignition), melting as they drop. Reducing the amount of unmolten sulfide will lead to less copper loss and more sustainable copper smelting, but the mineral that triggers ignition is unknown. In this study, the flammability and melting process of the sulfides and their mixture were evaluated using a drop tube furnace. Ignition and combustion during dropping were observed using a charge-coupled device camera and a high-speed camera. Quenched samples after the ignition and combustion test were analyzed using scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy and X-ray diffraction. Under this experimental condition, FeS 2 and CuFeS 2 ignited and melted well, whereas Cu 5 FeS 4 and Cu 2 S were nonflammable and hardly melted. Their flammability and melting were improved by the addition of FeS 2 and CuFeS 2 , indicating that FeS 2 and CuFeS 2 can act as ignition triggers. Multiple regression analysis was used to understand the effect of the mineral composition of mixtures on melting. The amount of flammable minerals (FeS 2 , CuFeS 2 ) predominantly influenced melting, whereas the effects of Cu 2 S, Cu 5 FeS 4 , and other oxides were negligible. Although Py does not contain copper, it may be useful for smelting high-grade copper minerals (Cu 2 S, Cu 5 FeS 4 ) in copper flash smelting.
Förderung
- Japan Society for the Promotion of Science
Zitieren
APA
Nishioka, N., Uno, K., & Takebe, H. (2026). Evaluation of Mineral Melting in Drop Tube Furnace for Copper Smelting. Journal of Sustainable Materials Science and Engineering, 02. https://doi.org/10.1142/s3060892925500041
Vancouver
Nishioka N, Uno K, Takebe H. Evaluation of Mineral Melting in Drop Tube Furnace for Copper Smelting. Journal of Sustainable Materials Science and Engineering. 2026;02. doi:10.1142/s3060892925500041
BibTeX
@article{Nishioka2026,
author = {Nishioka, Nobuyasu and Uno, Kyosuke and Takebe, Hiromichi},
title = {Evaluation of Mineral Melting in Drop Tube Furnace for Copper Smelting},
journal = {Journal of Sustainable Materials Science and Engineering},
year = {2026},
volume = {02},
doi = {10.1142/s3060892925500041}
}
EUVIMED