A novel ultraflexible 3D transparent electrode based on CNTs/AgNWs/PVA for photovoltaic cells
Functional Materials Letters · 2026-01 · 19
DOI: 10.1142/s1793604726510197 ↗Kurz gefasst
Fachartikel in der Zeitschrift Functional Materials Letters, online erschienen am 30.05.2026. Verfasst von Zhiwei Yang und 4 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben. Gefördert von: Jilin Provincial Scientific and Technological Development Program.
Abstract (Originalsprache)
While the shift toward surface-textured three-dimensional (3D) architectures in photovoltaics significantly enhances light trapping, it also poses considerable challenges to conventional transparent electrodes. Indium tin oxide (ITO) and fluorine-doped tin oxide (FTO) suffer from poor sidewall coverage due to physical vapor deposition line-of-sight limitations, while AgNWs networks exhibit work function mismatch with silicon, inducing Schottky barriers. Carbon nanotubes (CNTs) offer favorable work function alignment yet lack sufficient lateral conductivity alone. We propose a CNTs/AgNWs/PVA 3D composite electrode fabricated via sequential spin-coating onto patterned sapphire substrates, followed by polyvinyl alcohol (PVA) encapsulation and peel-off. The outermost CNT layer establishes near-ohmic contact with silicon, minimizing interfacial barriers, while the embedded AgNWs network provides high-conductivity lateral transport. The PVA matrix enables conformal replication of complex topographies. The composite electrode achieves a transmittance of 83.64% at 550[Formula: see text]nm, with a thin-layer resistance of 10[Formula: see text]Ω/sq, and possesses excellent mechanical flexibility and environmental stability. At the same time, it also has excellent stability in light transmittance and effective suppression of UV transmission due to strong absorption by CNTs. In theory, compared to AgNWs/PVA electrodes, it demonstrates enhanced charge collection on textured silicon surfaces and improved long-term stability against UV-induced degradation. This structural-functional synergistic design offers a promising interface engineering strategy for high-efficiency 3D photovoltaic devices.
Förderung
- Jilin Provincial Scientific and Technological Development Program
Zitieren
APA
Yang, Z., Ma, R., Yao, C., Song, J., & Cao, Y. (2026). A novel ultraflexible 3D transparent electrode based on CNTs/AgNWs/PVA for photovoltaic cells. Functional Materials Letters, 19. https://doi.org/10.1142/s1793604726510197
Vancouver
Yang Z, Ma R, Yao C, Song J, Cao Y. A novel ultraflexible 3D transparent electrode based on CNTs/AgNWs/PVA for photovoltaic cells. Functional Materials Letters. 2026;19. doi:10.1142/s1793604726510197
BibTeX
@article{Yang2026,
author = {Yang, Zhiwei and Ma, Rui and Yao, Chuangye and Song, Jinsong and Cao, Yuanxun},
title = {A novel ultraflexible 3D transparent electrode based on CNTs/AgNWs/PVA for photovoltaic cells},
journal = {Functional Materials Letters},
year = {2026},
volume = {19},
doi = {10.1142/s1793604726510197}
}
EUVIMED