EUVIMEDEUVIMED entdecken
Crossref

Influence of calcium doping on the structural, microstructural, and electrical properties of Ba1−xCaxTiO3 electroceramics

S. R. Salunkhe, L. D. Jadhav, V. L. Mathe, S. A. Patil

Functional Materials Letters · 2025-11 · 18 (08)

DOI: 10.1142/s1793604725510816 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Functional Materials Letters, online erschienen am 09.01.2026. Verfasst von S. R. Salunkhe und 3 weiteren Autor:innen. Die Arbeit nennt 66 Literaturangaben. Gefördert von: Chhatrapati Shahu Maharaj National Research.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Perovskite oxide material Ba[Formula: see text][Formula: see text]Ca[Formula: see text]TiO 3 (where [Formula: see text][Formula: see text] 0.0, 0.1, 0.2, and 0.3 mol %) was prepared via the conventional high-temperature solid-state double-sintering ceramic technique. Substituting Ba[Formula: see text] ions with Ca[Formula: see text] at the A-site was found to enhance the temperature stability of the phase while simultaneously reducing the degree of tetragonality. X-Ray Diffraction (XRD) patterns confirmed a single-phase tetragonal perovskite structure with P4[Formula: see text]mm symmetry for [Formula: see text][Formula: see text] 0.0, 0.1, and 0.2, whereas [Formula: see text][Formula: see text] 0.3 displayed a mixed tetragonal–orthorhombic structure, with crystallite sizes ranging from 28.947 nm to 20.841 nm. The surface morphology, examined using Scanning Electron Microscopy (SEM), revealed predominantly spherical grains with an average grain size ranging from 0.468 to 0.985 [Formula: see text]m. Energy-Dispersive X-ray (EDX) analysis verified the composition of Ba, Ca, Ti, and O. The dielectric properties of all ceramics were investigated in the temperature range of 25–150[Formula: see text]C. Among the compositions, [Formula: see text][Formula: see text] 0.2 exhibited the best functional performance, combining the highest dielectric constant ([Formula: see text][Formula: see text][Formula: see text] 6512.45) and low loss factor (tan [Formula: see text][Formula: see text] 0.01634) with enhanced thermal stability and a favorable structural tolerance factor. This composition presents an optimal balance between ferroelectric tetragonality and A-site modification. The incorporation of Ca[Formula: see text]ions enhanced the electrical response of the ceramics, with conductivity showing a positive correlation with temperature, making them suitable for energy-storage capacitor applications.

Förderung

  • Chhatrapati Shahu Maharaj National Research

Zitieren

APA

Salunkhe, S. R., Jadhav, L. D., Mathe, V. L., & Patil, S. A. (2025). Influence of calcium doping on the structural, microstructural, and electrical properties of Ba1−xCaxTiO3 electroceramics. Functional Materials Letters, 18(08). https://doi.org/10.1142/s1793604725510816

Vancouver

Salunkhe SR, Jadhav LD, Mathe VL, Patil SA. Influence of calcium doping on the structural, microstructural, and electrical properties of Ba1−xCaxTiO3 electroceramics. Functional Materials Letters. 2025;18(08). doi:10.1142/s1793604725510816

BibTeX
@article{Salunkhe2025,
  author = {Salunkhe, S. R. and Jadhav, L. D. and Mathe, V. L. and Patil, S. A.},
  title = {Influence of calcium doping on the structural, microstructural, and electrical properties of Ba1−xCaxTiO3 electroceramics},
  journal = {Functional Materials Letters},
  year = {2025},
  volume = {18},
  number = {08},
  doi = {10.1142/s1793604725510816}
}
Kostenlos starten →