EUVIMEDEUVIMED entdecken
Crossref

Preparation and Photocatalytic Performance of Hollow Spherical TiO 2 /Cu 2 O Composites

Fengqiang Liu, Liming Wang, Lihui Xu, Hong Pan, Ding Fan

Nano · 2023-05 · 18 (05)

DOI: 10.1142/s1793292022500904 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nano, online erschienen am 26.11.2022. Verfasst von Fengqiang Liu und 4 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 31 Literaturangaben. Gefördert von: Natural Science Foundation of Shanghai, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The anatase phase titanium dioxide sols were prepared by hydrothermal method using titanium sulfate as the titanium source. Copper acetate monohydrate was used as the copper source, cubic phase Cu 2 O with matched bandgap TiO 2 was introduced to synthesize hollow spherical nano-TiO 2 /Cu 2 O composites by precipitation method. The powder samples were characterized by X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM), transmission electron microscopy (TEM), specific surface area testing (BET), X-ray electron spectroscopy (XPS) and ultraviolet and visible spectrophotometry (UV–Vis) diffuse reflectance spectroscopy analysis using methyl orange (MO) solution as indicator. The results showed that the introduction of Cu 2 O did not affect the physical phase of TiO 2 . Titanium dioxide was a shuttle-shaped nanorod with an average particle size less than 20 nm, Cu 2 O was a sphere with an average particle size greater than 400 nm. TiO 2 loading results in smaller particle size, larger specific surface area, thinner spherical walls, increased hollowness, and improved adsorption and photocatalytic properties of spherical Cu 2 O. The optimum Ti content of TiO 2 /Cu 2 O nanocomposite was 4.0 wt.%, the maximum specific surface area of TiO 2 /Cu 2 O sample was 90.57 m 2 /g with particle size less than 150 nm. When TiO 2 /Cu 2 O sample with Ti content of 4.0 wt.% was used as photocatalyst, the adsorption effect was 66.2% under the dark reaction at 60 min, the degradation effect was 91.2% under visible light irradiation at 120 min. The adsorption and photocatalytic performance were excellent when the TiO 2 /Cu 2 O sample with Ti content of 4.0 wt.% was used as the photocatalyst. This work provides an effective method for photocatalytic treatment of waste liquids.

Förderung

  • Natural Science Foundation of Shanghai
  • National Natural Science Foundation of China

Zitieren

APA

Liu, F., Wang, L., Xu, L., Pan, H., & Fan, D. (2023). Preparation and Photocatalytic Performance of Hollow Spherical TiO 2 /Cu 2 O Composites. Nano, 18(05). https://doi.org/10.1142/s1793292022500904

Vancouver

Liu F, Wang L, Xu L, Pan H, Fan D. Preparation and Photocatalytic Performance of Hollow Spherical TiO 2 /Cu 2 O Composites. Nano. 2023;18(05). doi:10.1142/s1793292022500904

BibTeX
@article{Liu2023,
  author = {Liu, Fengqiang and Wang, Liming and Xu, Lihui and Pan, Hong and Fan, Ding},
  title = {Preparation and Photocatalytic Performance of Hollow Spherical TiO 2 /Cu 2 O Composites},
  journal = {Nano},
  year = {2023},
  volume = {18},
  number = {05},
  doi = {10.1142/s1793292022500904}
}
Kostenlos starten →