EUVIMEDEUVIMED entdecken
Crossref

Size-Dependent Elastic–Plastic Analysis of Functionally Graded Thick Cylinders Using a Unified Strain Gradient Elasticity-Plasticity Theory

Hassan Shokrollahi, Saeid Varmazyari

International Journal of Applied Mechanics · 16.11.2026

DOI: 10.1142/s1758825126500997 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Applied Mechanics, online erschienen am 16.11.2026. Verfasst von Hassan Shokrollahi und 1 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A unified strain-gradient elasticity–plasticity framework is presented for the size-dependent elastic–plastic analysis of functionally graded (FG) thick-walled cylinders subjected to internal and external pressure. Strain-gradient elasticity is employed in the elastic region, whereas strain-gradient plasticity governs the plastic response, allowing both elastic and plastic size effects to be incorporated within a single semi-analytical formulation. Material properties, including Young’s modulus, yield stress, and hardening modulus, are assumed to vary radially according to power-law distributions. Analytical field expressions are derived for the elastic and plastic regions under axisymmetric plane-strain conditions. The elastic response is represented through a reduced-order tensorial stress-gradient correction motivated by the Ru–Aifantis framework, while the plastic response is formulated using the Aifantis strain-gradient plasticity model. The elastic–plastic interface is determined from stress continuity, the external boundary condition, and a gradient-enhanced yield criterion. Parametric studies are performed to investigate the effects of internal pressure, elastic length scale, plastic strain-gradient coefficient, structural size, and material gradation index. The results show that internal pressure enlarges the plastic zone, whereas increasing the plastic gradient coefficient suppresses plastic-zone growth due to gradient-induced hardening. Material gradation significantly influences stress redistribution and yielding behavior. In contrast, the elastic length scale has a relatively small effect on the interface location but becomes more important for micro-scale cylinders. The reduced-order elastic-gradient correction is independently verified against an analytical strain-gradient elasticity solution for a purely elastic cylinder, yielding relative L 2 differences of 2.80% and 2.78% for the radial and circumferential stresses, respectively. Comparisons with classical and SGP-only solutions quantify the distinct contributions of elastic and plastic gradient effects and identify the scale regime in which the elastic-gradient correction becomes measurable.

Zitieren

APA

Shokrollahi, H., & Varmazyari, S. (2026). Size-Dependent Elastic–Plastic Analysis of Functionally Graded Thick Cylinders Using a Unified Strain Gradient Elasticity-Plasticity Theory. International Journal of Applied Mechanics. https://doi.org/10.1142/s1758825126500997

Vancouver

Shokrollahi H, Varmazyari S. Size-Dependent Elastic–Plastic Analysis of Functionally Graded Thick Cylinders Using a Unified Strain Gradient Elasticity-Plasticity Theory. International Journal of Applied Mechanics. 2026. doi:10.1142/s1758825126500997

BibTeX
@article{Shokrollahi2026,
  author = {Shokrollahi, Hassan and Varmazyari, Saeid},
  title = {Size-Dependent Elastic–Plastic Analysis of Functionally Graded Thick Cylinders Using a Unified Strain Gradient Elasticity-Plasticity Theory},
  journal = {International Journal of Applied Mechanics},
  year = {2026},
  doi = {10.1142/s1758825126500997}
}
Kostenlos starten →