EUVIMEDEUVIMED entdecken
Crossref

ON MULTISCALE MODELLING OF CREEP DAMAGE BY MEANS OF CELLULAR AUTOMATA

MARCIN CHRZANOWSKI, KRZYSZTOF NOWAK

Journal of Multiscale Modelling · 2009

DOI: 10.1142/s1756973709000153 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Multiscale Modelling, 2009. Verfasst von MARCIN CHRZANOWSKI und 1 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 28 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Deterioration of the materials, particularly metals under environmental conditions such as high temperature, alternating loading and chemical aggression is an example of processes which happen on the microstructure levels but project themselves upon macroscopically observed behaviour of materials and structures. This connection between both levels of observation was obvious to many researches, even if they aimed at macroscopic description on the level of continuum mechanics. The wisdom of micro- and macro-coupling was induced by a very complex nature of microstructural processes which demonstrated themselves as transgranular or intergranular failures, just to mention two typical modes of creep failure. The gap between micro- and macro-world was a challenge to both material science and mechanics societies throughout the second half of 20th century. A proposed method to cover this gap for polycrystalline materials is based on Cellular Automata (CA) technique well suited to be used on the microscopic level and giving responses relevant to macroscopic observations. It allows for microstructure modelling to distinguish grains and grain boundaries. Once it is done, a cellular automaton can be attributed to the Representative Volume Element (RVE) and failure mechanism described on the basis of appropriate transition rules. Examples of transgranular and intergranular creep damage growth are demonstrated. This procedure can be extended over the feedback from micro-level to macro-level leading to the formation of so-called CAFE technique.

Zitieren

APA

CHRZANOWSKI, M., & NOWAK, K. (2009). ON MULTISCALE MODELLING OF CREEP DAMAGE BY MEANS OF CELLULAR AUTOMATA. Journal of Multiscale Modelling. https://doi.org/10.1142/s1756973709000153

Vancouver

CHRZANOWSKI M, NOWAK K. ON MULTISCALE MODELLING OF CREEP DAMAGE BY MEANS OF CELLULAR AUTOMATA. Journal of Multiscale Modelling. 2009. doi:10.1142/s1756973709000153

BibTeX
@article{CHRZANOWSKI2009,
  author = {CHRZANOWSKI, MARCIN and NOWAK, KRZYSZTOF},
  title = {ON MULTISCALE MODELLING OF CREEP DAMAGE BY MEANS OF CELLULAR AUTOMATA},
  journal = {Journal of Multiscale Modelling},
  year = {2009},
  doi = {10.1142/s1756973709000153}
}
Kostenlos starten →