Effect of 9th-Order Wheel Polygon on Metro Vibration Characteristics: A Computational Model Updated with Experimental Investigation
International Journal of Computational Methods · 19.11.2026
DOI: 10.1142/s0219876226500672 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Computational Methods, online erschienen am 19.11.2026. Verfasst von Jianhui Tian und 1 weiteren Autor:innen.
Abstract (Originalsprache)
This paper presents a systematic study involving theoretical modelling and experimental validation and update of the deterioration in metro performance caused by the polygon of metro wheels. In order to investigate the mechanism of periodic impacts on the wheel-rail system caused by wheel polygonality in depth, a coupling model of the front wheel and rear wheel with the rail was established. This model fully accounts for the periodic excitation caused by 9th-order polygon and the transmission of resulting vibration impacts at the wheel-rail interface. By comparing simulation results with test results, the study confirmed that the coupled system model is accurate and reliable. Building on this validated and updated model, the paper goes on to investigate the mutual influence of the vibration impacts of the front wheel and rear wheel on the same bogie. Defining a typical 9th-order wheel polygon enabled an in-depth analysis of the evolution of the dynamic vibration characteristics of the wheel-rail system to be conducted, focusing on three key indicators: wheel-rail forces, wheel vibration accelerations, the vibration accelerations of the car body. The research found that the vertical wheel vibration accelerations of the two types of wheels peak near 85 Hz, whereas the lateral responses are concentrated below 50 Hz in the frequency domain. At the wheelset level, resilient wheels generally show slightly lower vertical and lateral vibration accelerations than standard wheels, confirming the effectiveness of resilient wheels in reducing vibration.
Zitieren
APA
Tian, J., & Cao, Y. (2026). Effect of 9th-Order Wheel Polygon on Metro Vibration Characteristics: A Computational Model Updated with Experimental Investigation. International Journal of Computational Methods. https://doi.org/10.1142/s0219876226500672
Vancouver
Tian J, Cao Y. Effect of 9th-Order Wheel Polygon on Metro Vibration Characteristics: A Computational Model Updated with Experimental Investigation. International Journal of Computational Methods. 2026. doi:10.1142/s0219876226500672
BibTeX
@article{Tian2026,
author = {Tian, Jianhui and Cao, Yu},
title = {Effect of 9th-Order Wheel Polygon on Metro Vibration Characteristics: A Computational Model Updated with Experimental Investigation},
journal = {International Journal of Computational Methods},
year = {2026},
doi = {10.1142/s0219876226500672}
}
EUVIMED