EUVIMEDEUVIMED entdecken
Crossref

Prediction of optimal process parameters for laser metal deposition of thin-walls using machine learning based on optical monitoring data

M.I. Bannikov, P.S. Rodin, A.V. Dubrov

Journal of Advanced Manufacturing Systems · 13.11.2026

DOI: 10.1142/s0219686728500540 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Advanced Manufacturing Systems, online erschienen am 13.11.2026. Verfasst von M.I. Bannikov und 2 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This article proposes an approach that uses machine learning to determine the optimal process parameters for the laser deposition of thin walls. The following machine learning models were tested: gradient boosting implemented with CatBoost, a fully connected neural network, and a recurrent neural network with long short-term memory block. To obtain training dataset data, thin walls were deposited from stainless steel. Data on wall geometry (height, width, standard deviation of height), obtained through optical monitoring, and process parameters - laser power, scanning speed, and wire feed rate - were used. For the recurrent neural network, a modified dataset was used, including characteristics of the current layer and the history of previous layers. The study showed that with a history depth of 9 layers, the recurrent neural network achieved the highest prediction accuracy, outperforming gradient boosting and the fully connected neural network across all metrics: the mean absolute error for predicting laser power was 1.5 percentage points, for scanning speed of 0.072 mm/s and for wire feed rate of 0.064 mm/s. The results demonstrate that incorporating the temporal history of previously deposited layers significantly improves the prediction of process parameters compared with models that consider each layer independently. The proposed approach provides a promising basis for adaptive closed-loop control of laser metal deposition using optical monitoring

Zitieren

APA

Bannikov, M., Rodin, P., & Dubrov, A. (2026). Prediction of optimal process parameters for laser metal deposition of thin-walls using machine learning based on optical monitoring data. Journal of Advanced Manufacturing Systems. https://doi.org/10.1142/s0219686728500540

Vancouver

Bannikov M, Rodin P, Dubrov A. Prediction of optimal process parameters for laser metal deposition of thin-walls using machine learning based on optical monitoring data. Journal of Advanced Manufacturing Systems. 2026. doi:10.1142/s0219686728500540

BibTeX
@article{Bannikov2026,
  author = {Bannikov, M.I. and Rodin, P.S. and Dubrov, A.V.},
  title = {Prediction of optimal process parameters for laser metal deposition of thin-walls using machine learning based on optical monitoring data},
  journal = {Journal of Advanced Manufacturing Systems},
  year = {2026},
  doi = {10.1142/s0219686728500540}
}
Kostenlos starten →