A Numerical and Experimental Investigation into the Manufacturing Process of an Inconel 600 Superalloy Shell for Aerospace Ignition Systems
Journal of Advanced Manufacturing Systems · 11.11.2026 · 1-30
DOI: 10.1142/s0219686728500485 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Advanced Manufacturing Systems, online erschienen am 11.11.2026. Verfasst von Ishraga Galal-Eldin Abdalla Awad und 6 weiteren Autor:innen.
Abstract (Originalsprache)
Jet engine spark plugs, which consist of a metal body, insulator, electrode, and adhesive, initiate combustion through an intermittent spark. This research focuses on the production of the plug’s metal shell for the aircraft engine, which was specifically fabricated from the nickel-based superalloy Inconel 600. The manufacturing process was preceded by a numerical simulation in Abaqus to analyze the heat and stress distribution within the spark plug. The spark plug body was then fabricated through sequential CNC turning and electrical discharge machining (EDM) processes. The manufactured sample was evaluated for dimensional accuracy and quality through surface roughness measurement, SEM microstructure analysis, and hardness testing. The minimum achievable surface roughness was attained using distinct optimal parameters for each process. CNC machining required a feed rate of 0.06 mm/rev and a cutting speed of 60 m/min, whereas EDM required a pulse-on time of 5 [Formula: see text]s, a pulse-off time of 4 [Formula: see text]s, an electric current of 8 A, and purified dielectric fluid. The optimization of EDM parameters, notably a shorter pulse-on time and dielectric purification, successfully mitigated microstructural defects like globules, microcracks, and coarse carbides, thereby producing an excellent surface finish. The spark plug fabricated via CNC and EDM machining exhibits density and hardness values equivalent to those of the original Phantom F-5 spark plug.
Zitieren
APA
Awad, I. G. A., Afshari, M., Alavi, S. A., Afshari, H., Samadi, M. R., Smerat, A., & Shewakh, W. M. (2026). A Numerical and Experimental Investigation into the Manufacturing Process of an Inconel 600 Superalloy Shell for Aerospace Ignition Systems. Journal of Advanced Manufacturing Systems, 1-30. https://doi.org/10.1142/s0219686728500485
Vancouver
Awad IGA, Afshari M, Alavi SA, Afshari H, Samadi MR, Smerat A, et al. A Numerical and Experimental Investigation into the Manufacturing Process of an Inconel 600 Superalloy Shell for Aerospace Ignition Systems. Journal of Advanced Manufacturing Systems. 2026:1-30. doi:10.1142/s0219686728500485
BibTeX
@article{Awad2026,
author = {Awad, Ishraga Galal-Eldin Abdalla and Afshari, Mahmoud and Alavi, Seyed Amirhossein and Afshari, Hossein and Samadi, Mohammad Reza and Smerat, Aseel and Shewakh, Walid M.},
title = {A Numerical and Experimental Investigation into the Manufacturing Process of an Inconel 600 Superalloy Shell for Aerospace Ignition Systems},
journal = {Journal of Advanced Manufacturing Systems},
year = {2026},
pages = {1--30},
doi = {10.1142/s0219686728500485}
}
EUVIMED