EUVIMEDEUVIMED entdecken
Crossref

Prediction of Neutral Layer Shifting in Thin Sheet Metal Bending: A Combined Finite Element Simulation, Machine Learning, and Experimental Study

Gao Li, Zhiheng Niu, Shixi Zhao, Xinhao Zhou, Bing Wang

Journal of Advanced Manufacturing Systems · 07.07.2026 · 1-20

DOI: 10.1142/s0219686728500138 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Advanced Manufacturing Systems, online erschienen am 07.07.2026. Verfasst von Gao Li und 4 weiteren Autor:innen. Gefördert von: Taiyuan University of Science and Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To address poor dimensional precision and compromised service performance caused by neutral layer displacement in sheet metal bending, this study integrates numerical simulation and experimental validation to establish a bending process database for thin sheets of various thicknesses. Key factors affecting neutral layer displacement are analyzed, and a prediction model for the neutral layer coefficient [Formula: see text] is developed, with an absolute validation error below 0.05 in [Formula: see text] for the reported verification cases. A differentiated parameter optimization strategy is proposed: thinner sheets use smaller bending radii and higher speeds; as thickness increases, the radius is enlarged and speed reduced. For sheets thicker than 1.0 mm, a larger radius and strictly controlled speed are required to inhibit abnormal displacement. The findings provide a theoretical basis for precise parameter optimization and significantly improve sheet metal forming quality.

Förderung

  • Taiyuan University of Science and Technology

Zitieren

APA

Li, G., Niu, Z., Zhao, S., Zhou, X., & Wang, B. (2026). Prediction of Neutral Layer Shifting in Thin Sheet Metal Bending: A Combined Finite Element Simulation, Machine Learning, and Experimental Study. Journal of Advanced Manufacturing Systems, 1-20. https://doi.org/10.1142/s0219686728500138

Vancouver

Li G, Niu Z, Zhao S, Zhou X, Wang B. Prediction of Neutral Layer Shifting in Thin Sheet Metal Bending: A Combined Finite Element Simulation, Machine Learning, and Experimental Study. Journal of Advanced Manufacturing Systems. 2026:1-20. doi:10.1142/s0219686728500138

BibTeX
@article{Li2026,
  author = {Li, Gao and Niu, Zhiheng and Zhao, Shixi and Zhou, Xinhao and Wang, Bing},
  title = {Prediction of Neutral Layer Shifting in Thin Sheet Metal Bending: A Combined Finite Element Simulation, Machine Learning, and Experimental Study},
  journal = {Journal of Advanced Manufacturing Systems},
  year = {2026},
  pages = {1--20},
  doi = {10.1142/s0219686728500138}
}
Kostenlos starten →