Ball Milling-Assisted Stir Casting of Aluminum Composites with Progressive Synergistic Reinforcement of Al2O3, Si3N4 and TiC
Journal of Advanced Manufacturing Systems · 2026-01 · 25 (01) · 49-64
DOI: 10.1142/s0219686726500034 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Advanced Manufacturing Systems, online erschienen am 03.06.2025. Verfasst von N. Sudheer Kumar Varma und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 25 Literaturangaben.
Abstract (Originalsprache)
Each reinforcement uniquely influences the matrix by imparting distinct properties. This study evaluates the use of aluminum oxide (Al 2 O 3 ), silicon nitride (Si 3 N 4 ) and titanium carbide (TiC) in an aluminum metal matrix composite (MMC) fabricated through a hybrid technique combining ball milling and stir casting. Initially, Al 2 O 3 is progressively incorporated into the matrix melt at uniform intervals of 0.5 wt.% until a threshold is reached. Subsequently, Si 3 N 4 is added to the established Al 2 O 3 threshold to determine its limit. Finally, TiC is introduced at the threshold levels of Al 2 O 3 and Si 3 N 4 to develop a composite that integrates the benefits of all three reinforcements. Experimental findings indicate that the optimal composition, achieving the highest ultimate tensile strength (UTS) of 117 MPa, consists of 1 wt.% Al 2 O 3 , 1 wt.% Si 3 N 4 and 0.5 wt.% TiC. This is 32.95% higher than that of the composite without any reinforcement. With this optimal composition, the Brinell hardness number (BHN) achieved is 51, showcasing a 29.1% improvement over composite without any reinforcements. The sample with the optimal composition also had a 66.91% improvement in ductility. Field emission scanning electron microscopy (FESEM) micrograph analysis, followed by electron backscatter diffraction (EBSD)-based grain size evaluation, confirms the viability of the Orowan and Hall–Petch strengthening mechanisms in the cast aluminum composite.
Zitieren
APA
Varma, N. S. K., Rajasekhar, P., Ganesan, G., & Raju, K. S. R. (2026). Ball Milling-Assisted Stir Casting of Aluminum Composites with Progressive Synergistic Reinforcement of Al2O3, Si3N4 and TiC. Journal of Advanced Manufacturing Systems, 25(01), 49-64. https://doi.org/10.1142/s0219686726500034
Vancouver
Varma NSK, Rajasekhar P, Ganesan G, Raju KSR. Ball Milling-Assisted Stir Casting of Aluminum Composites with Progressive Synergistic Reinforcement of Al2O3, Si3N4 and TiC. Journal of Advanced Manufacturing Systems. 2026;25(01):49-64. doi:10.1142/s0219686726500034
BibTeX
@article{Varma2026,
author = {Varma, N. Sudheer Kumar and Rajasekhar, P. and Ganesan, G. and Raju, K. Sita Rama},
title = {Ball Milling-Assisted Stir Casting of Aluminum Composites with Progressive Synergistic Reinforcement of Al2O3, Si3N4 and TiC},
journal = {Journal of Advanced Manufacturing Systems},
year = {2026},
volume = {25},
number = {01},
pages = {49--64},
doi = {10.1142/s0219686726500034}
}
EUVIMED