EUVIMEDEUVIMED entdecken
Crossref

MECHANICAL, TRIBOLOGICAL, FATIGUE, AND CREEP PERFORMANCE OF AA 7075 COMPOSITES REINFORCED WITH ANNEALED AND FUNCTIONALIZED BIOSILICA FROM RED MATTA RICE HUSK

K. PRATHEESH, SEENIAPPAN KALIAPPAN, L. NATRAYAN, M. RAMYA

Surface Review and Letters · 28.07.2025

DOI: 10.1142/s0218625x25501975 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Surface Review and Letters, online erschienen am 28.07.2025. Verfasst von K. PRATHEESH und 3 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 31 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The effects of heat-treated biosilica from red matta rice husk added to AA7075 metal matrix composites are the subject of this study. Matrix fabrication was carried out using the stir casting method. Specimens were subsequently characterized according to ASTM standards, covering mechanical, fatigue, dry and wet sliding behavior, and creep strain properties. Among the different designations produced, AA2 stands out as showing especially promising mechanical and fatigue properties. With an impact energy of 32.8[Formula: see text]J, a yield strength of 241[Formula: see text]MPa, a fatigue strength of 318[Formula: see text]MPa, and a tensile strength of 547[Formula: see text]MPa, AA2 is quite impressive. This classification emphasizes the beneficial effect of biosilica incorporation on the mechanical and fatigue properties of the composite. AA3, which contains 5[Formula: see text]wt.% biosilica, exhibits decreased creep strain and improved wear resistance in dry and wet sliding situations. The coefficient of friction (COF) is 0.57, and the specific wear rate is 0.018[Formula: see text]mm 3 /Nm for dry sliding wear, as shown in AA3. The specific wear rate in wet sliding wear is 0.007[Formula: see text]mm 3 /Nm, and there is a COF of 0.55. The biosilica, which is derived from red matta rice husk, acts as a reinforcing agent, improving the matrix’s microstructural stability and load transfer capabilities. At 2000, 4000, 6000, 8000, and 10,000[Formula: see text]s, respectively, AA3 shows reduced creep strain values of 0.0102, 0.02494, 0.0994, 0.221, and 0.379. Applications requiring exceptional fatigue performance, mechanical strength, and wear resistance should benefit from biosilica-reinforced AA7075 composites, according to this study. The results provide important information for developing new materials with better overall performance.

Zitieren

APA

PRATHEESH, K., KALIAPPAN, S., NATRAYAN, L., & RAMYA, M. (2025). MECHANICAL, TRIBOLOGICAL, FATIGUE, AND CREEP PERFORMANCE OF AA 7075 COMPOSITES REINFORCED WITH ANNEALED AND FUNCTIONALIZED BIOSILICA FROM RED MATTA RICE HUSK. Surface Review and Letters. https://doi.org/10.1142/s0218625x25501975

Vancouver

PRATHEESH K, KALIAPPAN S, NATRAYAN L, RAMYA M. MECHANICAL, TRIBOLOGICAL, FATIGUE, AND CREEP PERFORMANCE OF AA 7075 COMPOSITES REINFORCED WITH ANNEALED AND FUNCTIONALIZED BIOSILICA FROM RED MATTA RICE HUSK. Surface Review and Letters. 2025. doi:10.1142/s0218625x25501975

BibTeX
@article{PRATHEESH2025,
  author = {PRATHEESH, K. and KALIAPPAN, SEENIAPPAN and NATRAYAN, L. and RAMYA, M.},
  title = {MECHANICAL, TRIBOLOGICAL, FATIGUE, AND CREEP PERFORMANCE OF AA 7075 COMPOSITES REINFORCED WITH ANNEALED AND FUNCTIONALIZED BIOSILICA FROM RED MATTA RICE HUSK},
  journal = {Surface Review and Letters},
  year = {2025},
  doi = {10.1142/s0218625x25501975}
}
Kostenlos starten →