EUVIMEDEUVIMED entdecken
Crossref

First-Order Universal Active Filter Configuration Using Single VCII+

Kirti Kaharwar, D. R. Bhaskar, Pragati Kumar, Ram Bhagat

Journal of Circuits, Systems and Computers · 30.01.2024 · 33 (02)

DOI: 10.1142/s0218126624500385 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Circuits, Systems and Computers, online erschienen am 09.08.2023. Verfasst von Kirti Kaharwar und 3 weiteren Autor:innen. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 75 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A new universal active filter configuration is presented in this paper which is capable of realizing all three first-order filter responses namely all pass (AP), low pass (LP) and high pass (HP) using a single second generation voltage conveyor (VCII+), a virtually grounded capacitor and two resistors. The proposed circuit offers tunability of the cut-off frequency, gain (for HP filter) and simultaneous availability of two filter outputs, one at a low impedance node (HP/AP), the other output, namely the LPF will require a voltage buffer to avoid loading. The nonideal analysis of filter responses based on the nonideal model of VCII+ is carried out by considering all the parasitic immittances and nonideal gains and found that they have no significant effect on the performance of the proposed filter structure. Sensitivity analysis with respect to active and passive components has also been carried out. The functionality of the presented circuit has been validated through simulations and experimental results, where the VCII+ was implemented using the macro model of the commercially available CFOA IC AD844. Additionally, the proposed circuit has been tested using a CMOS VCII+ implemented with 0.18[Formula: see text][Formula: see text]m TSMC technology parameters. The tests include advanced evaluations based on Monte Carlo simulations.

Zitieren

APA

Kaharwar, K., Bhaskar, D. R., Kumar, P., & Bhagat, R. (2024). First-Order Universal Active Filter Configuration Using Single VCII+. Journal of Circuits, Systems and Computers, 33(02). https://doi.org/10.1142/s0218126624500385

Vancouver

Kaharwar K, Bhaskar DR, Kumar P, Bhagat R. First-Order Universal Active Filter Configuration Using Single VCII+. Journal of Circuits, Systems and Computers. 2024;33(02). doi:10.1142/s0218126624500385

BibTeX
@article{Kaharwar2024,
  author = {Kaharwar, Kirti and Bhaskar, D. R. and Kumar, Pragati and Bhagat, Ram},
  title = {First-Order Universal Active Filter Configuration Using Single VCII+},
  journal = {Journal of Circuits, Systems and Computers},
  year = {2024},
  volume = {33},
  number = {02},
  doi = {10.1142/s0218126624500385}
}
Kostenlos starten →