Reliability Modeling and Closed-Loop Optimization of a Non-Contact Profile Detection System Using Fuzzy AHP and Grey Relational Analysis
Transactions of the Canadian Society for Mechanical Engineering · 21.11.2026
DOI: 10.1139/tcsme-2026-0119 ↗Kurz gefasst
Fachartikel in der Zeitschrift Transactions of the Canadian Society for Mechanical Engineering, online erschienen am 21.11.2026. Verfasst von Yasen Feng und 2 weiteren Autor:innen.
Abstract (Originalsprache)
Limited failure data and uncertain expert judgments complicate reliability allocation and prediction during preliminary design. This study develops a closed-loop framework for a non-contact profile detection system for axisymmetric thin-shell workpieces. Five functional subsystems are modeled using a series reliability block diagram and fault tree analysis. A two-level comprehensive factor model with fuzzy analytic hierarchy process (AHP) allocates failure-rate targets, while similar-product prediction integrating ordered weighted averaging (OWA), intuitionistic trapezoidal fuzzy numbers, and grey relational analysis (GRA) corrects historical rates. Comparison identifies the optical measurement and numerical-control rotary table subsystems as having the smallest reliability margins. Under the benchmark scenario, optical power control, dual-camera redundancy, sealing, thermal management, and dual-grating redundancy reduce the predicted baseline system failure rate from 775.007 × 10-6 h-1 to 650.031 × 10-6 h-1 and increase mean time between failures (MTBF) from 1290.3 to 1538.4 h. Sensitivity scenarios yield MTBFs of 1421.5–1676.3 h; For the same increment in subsystem failure-rate reduction fractions, the sensitivity of the system failure rate to S4 improvement is approximately 2.08 times that to S3 improvement. The framework supports allocation, prediction, redistribution, and prospective optimization without complete life-test data.
Zitieren
APA
Feng, Y., Hu, Q., & Hu, H. (2026). Reliability Modeling and Closed-Loop Optimization of a Non-Contact Profile Detection System Using Fuzzy AHP and Grey Relational Analysis. Transactions of the Canadian Society for Mechanical Engineering. https://doi.org/10.1139/tcsme-2026-0119
Vancouver
Feng Y, Hu Q, Hu H. Reliability Modeling and Closed-Loop Optimization of a Non-Contact Profile Detection System Using Fuzzy AHP and Grey Relational Analysis. Transactions of the Canadian Society for Mechanical Engineering. 2026. doi:10.1139/tcsme-2026-0119
BibTeX
@article{Feng2026,
author = {Feng, Yasen and Hu, Qiguo and Hu, Huoran},
title = {Reliability Modeling and Closed-Loop Optimization of a Non-Contact Profile Detection System Using Fuzzy AHP and Grey Relational Analysis},
journal = {Transactions of the Canadian Society for Mechanical Engineering},
year = {2026},
doi = {10.1139/tcsme-2026-0119}
}
EUVIMED