EUVIMEDEUVIMED entdecken
Crossref

Study on the preparation of diamond-coated tools and their cutting performance using the segmented oxygen-doping method at low temperatures

Jibo Hu, Yapei Zhao

Transactions of the Canadian Society for Mechanical Engineering · 01.01.2026 · 50 · 1-8

DOI: 10.1139/tcsme-2025-0252 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Transactions of the Canadian Society for Mechanical Engineering, erschienen am 01.01.2026. Verfasst von Jibo Hu und 1 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Gefördert von: Key Scientific Research Project of Colleges and Universities in Henan Province, Henan Provincial Science and Technology Research Project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The paper proposes a segmented oxygen-doping process technology and discusses and analyzes the surface morphology, quality, indentation morphology, and tool wear performance of diamond films. The results show that using the segmented oxygen-doping process (first low-temperature oxygen doping for 2 h, followed by high-temperature oxygen-free deposition for 9 h), the diamond morphology is uniform and clear, the residual stress of the diamond film is 0.674 GPa (about 53% of that of the high-temperature process), and the indentation crack diameter is about 312.7 µm. In addition, XRD peak intensity results show that the samples prepared by the segmented oxygen-doping process preferentially exhibit (111) and (110) orientations. The deposition reaction rate is increased to 3.64 µm/h (about 84% of the high-temperature process). The surface wear of diamond-coated tools is reduced to 92.0 µm, and the wear trend of the coated tools is lower than that of the low-temperature and high-temperature process wear curves, improving their wear resistance.

Förderung

  • Key Scientific Research Project of Colleges and Universities in Henan Province
  • Henan Provincial Science and Technology Research Project

Zitieren

APA

Hu, J., & Zhao, Y. (2026). Study on the preparation of diamond-coated tools and their cutting performance using the segmented oxygen-doping method at low temperatures. Transactions of the Canadian Society for Mechanical Engineering, 50, 1-8. https://doi.org/10.1139/tcsme-2025-0252

Vancouver

Hu J, Zhao Y. Study on the preparation of diamond-coated tools and their cutting performance using the segmented oxygen-doping method at low temperatures. Transactions of the Canadian Society for Mechanical Engineering. 2026;50:1-8. doi:10.1139/tcsme-2025-0252

BibTeX
@article{Hu2026,
  author = {Hu, Jibo and Zhao, Yapei},
  title = {Study on the preparation of diamond-coated tools and their cutting performance using the segmented oxygen-doping method at low temperatures},
  journal = {Transactions of the Canadian Society for Mechanical Engineering},
  year = {2026},
  volume = {50},
  pages = {1--8},
  doi = {10.1139/tcsme-2025-0252}
}
Kostenlos starten →