Key design parameters optimization and joint control of double throttling pipe air damping spring
Transactions of the Canadian Society for Mechanical Engineering · 01.01.2026 · 50 · 1-17
DOI: 10.1139/tcsme-2025-0104 ↗Kurz gefasst
Fachartikel in der Zeitschrift Transactions of the Canadian Society for Mechanical Engineering, erschienen am 01.01.2026. Verfasst von Junjie Chen und 6 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben. Gefördert von: State Key Laboratory of Intelligent Green Vehicle and Mobility, National Natural Science Foundation of China.
Abstract (Originalsprache)
The double throttling pipe air damping spring can significantly extend the stiffness and damping adjustable range of air springs. Focusing on the double-throttling air damping spring with length and diameter as key design parameters, this study establishes a dynamic mechanical model that accounts for turbulent effects of airflow passing through the throttling pipe. Subsequently, an eight-degree-of-freedom vehicle model incorporating this spring system is constructed. To enhance vehicle ride comfort and handling stability, a multi-objective grey wolf optimization algorithm is employed to determine the optimal pipe length and diameter for B-Class and C-Class roads. Post-optimization results demonstrate maximum improvements of the body acceleration, roll angle, pitch angle, lateral acceleration, and yaw velocity of the vehicle body on B-Class and C-Class roads are 21.46%, 16.13%, 17.94%, 7.82%, and 26.47%, respectively. Furthermore, a novel joint control strategy is proposed by integrating Sky-Hook reference sliding mode control with switching control, enhancing both adaptability and robustness of the suspension system. The results present that after adopting the joint control strategy, the aforementioned performance metrics are improved by 31.44%, 42.37%, 44.97%, 18.8%, and 55.32%, respectively. This research can provide theoretical guidance for the design, matching, and accurate control of double throttling pipe air damping suspension systems.
Förderung
- State Key Laboratory of Intelligent Green Vehicle and Mobility
- National Natural Science Foundation of China
Zitieren
APA
Chen, J., Liu, X., Yang, S., Liu, C., Wu, M., Liu, Z., & Zhong, H. (2026). Key design parameters optimization and joint control of double throttling pipe air damping spring. Transactions of the Canadian Society for Mechanical Engineering, 50, 1-17. https://doi.org/10.1139/tcsme-2025-0104
Vancouver
Chen J, Liu X, Yang S, Liu C, Wu M, Liu Z, et al. Key design parameters optimization and joint control of double throttling pipe air damping spring. Transactions of the Canadian Society for Mechanical Engineering. 2026;50:1-17. doi:10.1139/tcsme-2025-0104
BibTeX
@article{Chen2026,
author = {Chen, Junjie and Liu, Xinfeng and Yang, Shujun and Liu, Chen and Wu, Mingyu and Liu, Zhengchao and Zhong, Hong},
title = {Key design parameters optimization and joint control of double throttling pipe air damping spring},
journal = {Transactions of the Canadian Society for Mechanical Engineering},
year = {2026},
volume = {50},
pages = {1--17},
doi = {10.1139/tcsme-2025-0104}
}
EUVIMED