Key parameters for the development of an inverse analysis method for characterizing UHPC tensile behaviour
Canadian Journal of Civil Engineering · 01.01.2026 · 53 · 1-18
DOI: 10.1139/cjce-2025-0350 ↗Kurz gefasst
Fachartikel in der Zeitschrift Canadian Journal of Civil Engineering, erschienen am 01.01.2026. Verfasst von A. Beaudoin und 3 weiteren Autor:innen. Die Arbeit nennt 38 Literaturangaben. Gefördert von: Béton Préfabriqué du Lac, Sika Canada, Jacques Cartier and Champlain Bridges Incorporated.
Abstract (Originalsprache)
Designing structures with ultra-high performance fibre-reinforced concretes (UHPC) requires a thorough understanding of its tensile behaviour. Direct tensile tests provide valuable insights but require specialized equipment available in limited number of research laboratories. Bending tests are more accessible and several inverse analysis methods were developed to estimate UHPC tensile properties. However, each method was developed and validated for specific testing configurations. The inclusion of UHPC in CSA A23.1 and S6 (2019) prompted the adoption of European inverse analysis methods for North American bending tests, with limited success without adequate calibration. This provision was removed in 2025 leaving CSA S6 (2025) without a model for determining UHPC tensile behaviour from bending tests. This paper addresses this gap by proposing a simplified methodology that adapts an existing inverse analysis to alternative testing configurations, enables direct calculation of strain-hardening UHPC pre-peak tensile properties, and improves the reproduction of experimental tensile behaviour observed in 5 UHPC mixtures.
Förderung
- Béton Préfabriqué du Lac
- Sika Canada
- Jacques Cartier and Champlain Bridges Incorporated
- Euclid Canada
- Mitacs Canada
- Natural Sciences and Engineering Research Council (NSERC) of Canada
- City of Montreal
- Center for Research on Concrete Infrastructures of Quebec
Zitieren
APA
Beaudoin, A., Desmettre, C., Charron, J., & Massicotte, B. (2026). Key parameters for the development of an inverse analysis method for characterizing UHPC tensile behaviour. Canadian Journal of Civil Engineering, 53, 1-18. https://doi.org/10.1139/cjce-2025-0350
Vancouver
Beaudoin A, Desmettre C, Charron J, Massicotte B. Key parameters for the development of an inverse analysis method for characterizing UHPC tensile behaviour. Canadian Journal of Civil Engineering. 2026;53:1-18. doi:10.1139/cjce-2025-0350
BibTeX
@article{Beaudoin2026,
author = {Beaudoin, A. and Desmettre, C. and Charron, J.-P. and Massicotte, B.},
title = {Key parameters for the development of an inverse analysis method for characterizing UHPC tensile behaviour},
journal = {Canadian Journal of Civil Engineering},
year = {2026},
volume = {53},
pages = {1--18},
doi = {10.1139/cjce-2025-0350}
}
EUVIMED