Development of reliability-based design tools to determine toughness requirements for Canadian steel highway bridges
Canadian Journal of Civil Engineering · 01.01.2026 · 53 · 1-15
DOI: 10.1139/cjce-2025-0263 ↗Kurz gefasst
Fachartikel in der Zeitschrift Canadian Journal of Civil Engineering, erschienen am 01.01.2026. Verfasst von Thomas Ching Hon Ying und 5 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Gefördert von: University of Waterloo, Ontario Graduate Scholarship, Natural Sciences and Engineering Research Council of Canada.
Abstract (Originalsprache)
The current toughness provisions in CSA S6 lack a probabilistic basis and do not allow the influences on brittle fracture risk of several important factors to be explicitly considered in design. To address these shortcomings, this paper demonstrates how Monte Carlo simulation, fracture mechanics, and the master curve approach can be used establish reliability-based toughness requirements for Canadian steel highway bridges. The performance of a typical bridge designed to meet the current requirements is taken as a reference point to establish equivalent required toughness levels for a broad range of yield strengths, plate thicknesses, and demand-to-capacity ratios. The results are fitted to two-degree surfaces, allowing the Charpy V-notch test temperature and impact energy to be established for a specified reliability index. The resulting design tools may be of interest to engineers and owners endeavouring to improve the economy of steel highway bridges while ensuring consistent and acceptable levels of risk.
Förderung
- University of Waterloo
- Ontario Graduate Scholarship
- Natural Sciences and Engineering Research Council of Canada
- Canadian Institute of Steel Construction
Zitieren
APA
Ying, T. C. H., Chien, M. Y. X., Chehrazi, A., Kian, M. T., Walbridge, S., & Kuehn, B. (2026). Development of reliability-based design tools to determine toughness requirements for Canadian steel highway bridges. Canadian Journal of Civil Engineering, 53, 1-15. https://doi.org/10.1139/cjce-2025-0263
Vancouver
Ying TCH, Chien MYX, Chehrazi A, Kian MT, Walbridge S, Kuehn B. Development of reliability-based design tools to determine toughness requirements for Canadian steel highway bridges. Canadian Journal of Civil Engineering. 2026;53:1-15. doi:10.1139/cjce-2025-0263
BibTeX
@article{Ying2026,
author = {Ying, Thomas Ching Hon and Chien, Michelle Y. X. and Chehrazi, Ali and Kian, Mohammad Tolou and Walbridge, Scott and Kuehn, Bertram},
title = {Development of reliability-based design tools to determine toughness requirements for Canadian steel highway bridges},
journal = {Canadian Journal of Civil Engineering},
year = {2026},
volume = {53},
pages = {1--15},
doi = {10.1139/cjce-2025-0263}
}
EUVIMED