EUVIMEDEUVIMED entdecken
Crossref

X-FEM-based homogenization for the elastic properties of masonry considering damage

K. Abdelhalim, R.E. Erkmen

Canadian Journal of Civil Engineering · 01.01.2026 · 53 · 1-18

DOI: 10.1139/cjce-2025-0220 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Canadian Journal of Civil Engineering, erschienen am 01.01.2026. Verfasst von K. Abdelhalim und 1 weiteren Autor:innen. Die Arbeit nennt 44 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper develops an X-FEM-based computational homogenization methodology to determine the in-plane effective elastic properties of masonry considering the interface conditions between brick and the mortar. Under the assumption of periodic brick patterns a meso-scale representative volume element (RVE) is formed. The novelty in the proposed modelling approach is that the bricks of the masonry are embedded into the mortar matrix as closed regions of stiffer phases, where the lines of discontinuity due to phase changes from mortar to brick are introduced as interfaces by virtue of the extended finite element method. The developed methodology employs the concept of a window of interest within the RVE to determine the homogenized properties so that the bricks can be modelled as closed regions. This approach allows the underlying finite element mesh to be generated independent of the brick size and configuration while allowing the interface bond properties between the mortar and the brick to be adjusted to impose the conditions either as fully bonded or as separable due to damage induced cohesion loss. Accordingly the damaged masonry behaviour can be determined assuming the lack of interface bond stiffness at a local contact point between the brick and the mortar. To illustrate the effect of scale separation assumptions, alternative RVE boundary conditions including displacement, periodic, and traction boundary conditions are considered and their implementation methodologies are presented in detail. The proposed novel methodology is first validated by using comparisons with available analytical results from the literature and various alternative numerical modelling approaches. Case studies illustrate the influence of the RVE boundary conditions, the brick and the mortar content as well as the interface bond stiffness on the homogenized properties of masonry.

Zitieren

APA

Abdelhalim, K., & Erkmen, R. (2026). X-FEM-based homogenization for the elastic properties of masonry considering damage. Canadian Journal of Civil Engineering, 53, 1-18. https://doi.org/10.1139/cjce-2025-0220

Vancouver

Abdelhalim K, Erkmen R. X-FEM-based homogenization for the elastic properties of masonry considering damage. Canadian Journal of Civil Engineering. 2026;53:1-18. doi:10.1139/cjce-2025-0220

BibTeX
@article{Abdelhalim2026,
  author = {Abdelhalim, K. and Erkmen, R.E.},
  title = {X-FEM-based homogenization for the elastic properties of masonry considering damage},
  journal = {Canadian Journal of Civil Engineering},
  year = {2026},
  volume = {53},
  pages = {1--18},
  doi = {10.1139/cjce-2025-0220}
}
Kostenlos starten →