Experimental study on the influence of different types of nuts on the anchoring performance of steel bars
Canadian Journal of Civil Engineering · 01.01.2026 · 53 · 1-15
DOI: 10.1139/cjce-2025-0005 ↗Kurz gefasst
Fachartikel in der Zeitschrift Canadian Journal of Civil Engineering, erschienen am 01.01.2026. Verfasst von Yun Chen und 4 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben. Gefördert von: Key Research and Development Program of Hainan, Research Project of Collaborative Innovation Center of Hainan University of China, National Natural Science Foundation of China.
Abstract (Originalsprache)
In prefabricated concrete structures, nuts are a typical tool used to anchor the steel bars of pre-fabricated components. How to choose the appropriate nut is the key to achieving reliable anchoring of steel bars in prefabricated components. This study investigates the effects of different nut types (stainless steel flange nut, carbon steel flange nut, combination nut, and anchor plate nut) on the anchoring performance of steel bars with diameters from 8 to 28 mm. A comprehensive program of pull-out tests was carried out to evaluate the failure-to-yield ratio and characterize the failure modes. Subsequently, simplified mechanical model analysis was developed and analyzed for three different failure modes. The test results demonstrated that for specimens with bar diameters ranging from 8 to 20 mm, the stainless steel flange nut exhibited the best anchoring performance, whereas the anchor plate nut performed the poorest. For bar diameters between 22 and 28 mm, the carbon steel flange nut showed the optimal performance, and with the anchor plate nut again being the least effective. Flange nut generally outperformed combination nut, which is attributed to their superior structural integrity. Considering both anchoring performance and material cost, carbon steel flange nuts present the best choice. Therefore, it is recommended to use flange nuts in practical engineering (stainless steel for bars with D ≤ 20 mm, and carbon steel for bars with D ≥ 22 mm) to ensure the safety and durability of anchoring of steel bars.
Förderung
- Key Research and Development Program of Hainan
- Research Project of Collaborative Innovation Center of Hainan University of China
- National Natural Science Foundation of China
- Key Open Fund Project of the State Key Laboratory of Civil Engineering Disaster Prevention
- Hainan Science and Technology Special Funding Project
- Industry-sponsored research project
Zitieren
APA
Chen, Y., Peng, S., Dong, J., Zhang, J., & Fu, B. (2026). Experimental study on the influence of different types of nuts on the anchoring performance of steel bars. Canadian Journal of Civil Engineering, 53, 1-15. https://doi.org/10.1139/cjce-2025-0005
Vancouver
Chen Y, Peng S, Dong J, Zhang J, Fu B. Experimental study on the influence of different types of nuts on the anchoring performance of steel bars. Canadian Journal of Civil Engineering. 2026;53:1-15. doi:10.1139/cjce-2025-0005
BibTeX
@article{Chen2026,
author = {Chen, Yun and Peng, Shizhen and Dong, Jinshuang and Zhang, Jiaxi and Fu, Bo},
title = {Experimental study on the influence of different types of nuts on the anchoring performance of steel bars},
journal = {Canadian Journal of Civil Engineering},
year = {2026},
volume = {53},
pages = {1--15},
doi = {10.1139/cjce-2025-0005}
}
EUVIMED