EUVIMEDEUVIMED entdecken
Crossref

Comprehensive assessment of friction characteristics and durability of common pavement markings and materials using three-wheel polishing

Jieyi Bao, Xiaoqiang Hu, Ayesha Shah, Yi Jiang, Shuo Li

Canadian Journal of Civil Engineering · 01.10.2025 · 52 (10) · 1900-1914

DOI: 10.1139/cjce-2024-0545 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Canadian Journal of Civil Engineering, erschienen am 01.10.2025. Verfasst von Jieyi Bao und 4 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 36 Literaturangaben. Gefördert von: Joint Transportation Research Program.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Pavement markings are vital for organizing traffic flow and enhancing safety, but their friction characteristics are often overlooked and insufficiently addressed. This study assessed the friction performance of six marking types used by the Indiana Department of Transportation: waterborne paint, preformed tape, epoxy, polyurea, methyl methacrylate, and thermoplastics. Specimens incorporating various materials, including binders, glass beads, and antiskid particles, were conditioned using a three-wheel polishing device to simulate traffic wear. Friction metrics were measured with the British pendulum tester, dynamic friction tester, and circular track meter. Results revealed freshly applied markings exhibit 44% higher friction in dry than wet conditions, with waterborne paint outperforming non-waterborne paints. Also, correlation analyses were conducted to examine the influence of bead type, application rate, and binder thickness on friction and durability. Findings improve understanding of marking materials’ performance, supporting the development of enhanced standards and maintenance practices.

Förderung

  • Joint Transportation Research Program

Zitieren

APA

Bao, J., Hu, X., Shah, A., Jiang, Y., & Li, S. (2025). Comprehensive assessment of friction characteristics and durability of common pavement markings and materials using three-wheel polishing. Canadian Journal of Civil Engineering, 52(10), 1900-1914. https://doi.org/10.1139/cjce-2024-0545

Vancouver

Bao J, Hu X, Shah A, Jiang Y, Li S. Comprehensive assessment of friction characteristics and durability of common pavement markings and materials using three-wheel polishing. Canadian Journal of Civil Engineering. 2025;52(10):1900-1914. doi:10.1139/cjce-2024-0545

BibTeX
@article{Bao2025,
  author = {Bao, Jieyi and Hu, Xiaoqiang and Shah, Ayesha and Jiang, Yi and Li, Shuo},
  title = {Comprehensive assessment of friction characteristics and durability of common pavement markings and materials using three-wheel polishing},
  journal = {Canadian Journal of Civil Engineering},
  year = {2025},
  volume = {52},
  number = {10},
  pages = {1900--1914},
  doi = {10.1139/cjce-2024-0545}
}
Kostenlos starten →