EUVIMEDEUVIMED entdecken
Crossref

Direct measurement of shear mobilization in 3D-printed root analogues using distributed fibre-optic sensing

Gianmario Sorrentino, Jørgen Aske Reinertsen, Asmus Skar Christiansen, Ian Rasmussen

Canadian Geotechnical Journal · 01.01.2026 · 63 · 1-15

DOI: 10.1139/cgj-2026-0606 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Canadian Geotechnical Journal, erschienen am 01.01.2026. Verfasst von Gianmario Sorrentino und 3 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Root reinforcement can increase soil shear resistance, but the way individual roots deform and mobilize resistance during shearing remains difficult to observe directly. This study presents a controlled analogue methodology that combines scanned resin-based 3D-printed root geometries with distributed fibre-optic sensing to measure root-analogue deformation during direct shear testing. Short- and long-embedment configurations were prepared using the same scanned geometry and two resin formulations with contrasting mechanical properties. The short-embedment analogues produced a modest, predominantly local increase in shear resistance, with similar peak strengths for the stiff and compliant materials. This indicates that material stiffness was not fully mobilized when only a limited embedded length was available below the shear plane. In contrast, the long-embedment analogues showed progressive hardening, with shear resistance continuing to increase over the tested displacement range. Fibre-optic measurements showed that tensile strain was progressively mobilized along the embedded length, and integrated strain analysis linked the shear-strength increment to the fibre-based elongation index along the instrumented branch. These observations indicate that the additional resistance in the long-root configuration was governed primarily by tensile mobilization of the embedded root length, consistent with the development of a soil–root analogue composite across the shear plane. The proposed approach provides a practical framework for directly investigating deformation and mobilization mechanisms in controlled root-reinforced soil analogues.

Zitieren

APA

Sorrentino, G., Reinertsen, J. A., Christiansen, A. S., & Rasmussen, I. (2026). Direct measurement of shear mobilization in 3D-printed root analogues using distributed fibre-optic sensing. Canadian Geotechnical Journal, 63, 1-15. https://doi.org/10.1139/cgj-2026-0606

Vancouver

Sorrentino G, Reinertsen JA, Christiansen AS, Rasmussen I. Direct measurement of shear mobilization in 3D-printed root analogues using distributed fibre-optic sensing. Canadian Geotechnical Journal. 2026;63:1-15. doi:10.1139/cgj-2026-0606

BibTeX
@article{Sorrentino2026,
  author = {Sorrentino, Gianmario and Reinertsen, Jørgen Aske and Christiansen, Asmus Skar and Rasmussen, Ian},
  title = {Direct measurement of shear mobilization in 3D-printed root analogues using distributed fibre-optic sensing},
  journal = {Canadian Geotechnical Journal},
  year = {2026},
  volume = {63},
  pages = {1--15},
  doi = {10.1139/cgj-2026-0606}
}
Kostenlos starten →