EUVIMEDEUVIMED entdecken
Crossref

Incorporating rock joint behavior into a geomechanical–hydrogeological model to more realistically represent caving propagation

Diego Oyarzo, Kimie Suzuki Morales, Raúl Castro, René Gómez, Ramón Diaz, Marcial Carreño

Canadian Geotechnical Journal · 01.01.2026 · 63 · 1-13

DOI: 10.1139/cgj-2025-0399 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Canadian Geotechnical Journal, erschienen am 01.01.2026. Verfasst von Diego Oyarzo und 5 weiteren Autor:innen. Die Arbeit nennt 44 Literaturangaben. Gefördert von: Comisión Nacional de Investigación Científica y Tecnológica.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In cave mining environments, where the rock mass behaves as a continuous medium and the broken material as a discontinuous medium, groundwater flow modelling and management are inherently complex. This complexity is further influenced by the presence of joints, which interrupt rock mass continuity and thereby affect its geomechanical and hydrogeological behavior. Then, joints must be considered in these types of models. In this work, we applied a previously developed geomechanical–hydrogeological methodology to simulate groundwater flow during the propagation stage of caving, incorporating the rock joints behavior. The IMASS constitutive model was used to represent the rock mass, while the UBIQUITOUS model was incorporated to simulate the joints. The results indicate that joint orientation significantly influences caving propagation, which tends to follow structurally controlled paths. Additionally, the results show the behavior of groundwater inflow from the rock mass into the cave generated during caving. The incorporation of joints in the geomechanical simulations also generates an effect on groundwater flow orientation. What emerges from this work is a methodology that can graph preliminary estimates of the drainage required for the initial engineering stages of a block/panel caving project.

Förderung

  • Comisión Nacional de Investigación Científica y Tecnológica

Zitieren

APA

Oyarzo, D., Morales, K. S., Castro, R., Gómez, R., Diaz, R., & Carreño, M. (2026). Incorporating rock joint behavior into a geomechanical–hydrogeological model to more realistically represent caving propagation. Canadian Geotechnical Journal, 63, 1-13. https://doi.org/10.1139/cgj-2025-0399

Vancouver

Oyarzo D, Morales KS, Castro R, Gómez R, Diaz R, Carreño M. Incorporating rock joint behavior into a geomechanical–hydrogeological model to more realistically represent caving propagation. Canadian Geotechnical Journal. 2026;63:1-13. doi:10.1139/cgj-2025-0399

BibTeX
@article{Oyarzo2026,
  author = {Oyarzo, Diego and Morales, Kimie Suzuki and Castro, Raúl and Gómez, René and Diaz, Ramón and Carreño, Marcial},
  title = {Incorporating rock joint behavior into a geomechanical–hydrogeological model to more realistically represent caving propagation},
  journal = {Canadian Geotechnical Journal},
  year = {2026},
  volume = {63},
  pages = {1--13},
  doi = {10.1139/cgj-2025-0399}
}
Kostenlos starten →