EUVIMEDEUVIMED entdecken
Crossref

Particle morphology and principal stress direction dependent strength anisotropy through torsional shear testing

Shao-Heng He, Zhen-Yu Yin, Zhi Ding, Rui-Dong Li

Canadian Geotechnical Journal · 01.01.2025 · 62 · 1-23

DOI: 10.1139/cgj-2023-0717 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Canadian Geotechnical Journal, erschienen am 01.01.2025. Verfasst von Shao-Heng He und 3 weiteren Autor:innen. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 65 Literaturangaben. Gefördert von: Research Grants Council (RGC) of Hong Kong Special Administrative Region Government.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The major principal stress direction angle ( α σ ) experienced by granular soils varies widely in engineering, causing different strengths. However, how particle morphology affects the strength anisotropy behavior under different α σ remains unclear. To address this gap, this study performed drained hollow cylinder torsional shear tests under different α σ on six granular materials with distinct morphologies. Results highlight the significant dependence of peak strengths of granular materials on both particle morphology and α σ . Increasing particle shape irregularity and surface roughness leads to a considerable enhancement in peak strength, while this peak strength significantly degrades with increasing α σ . Materials with more irregular shapes were found to have a more pronounced strength anisotropy. Furthermore, the initial fabric of particle packings, derived from three-dimensional X-ray microtomography, was used to interpret microscopic mechanisms behind the morphology-dependent strength anisotropy. Irregular-shaped materials display broader preferred particle orientations and higher initial fabric anisotropy compared to relatively regular-shaped materials. This higher morphology-induced fabric anisotropy contributes to strength anisotropy, and a correlation was established for describing this trend. Additionally, an anisotropic failure criterion incorporating fabric anisotropy was developed to characterize the strength envelope for granular materials with diverse shapes.

Förderung

  • Research Grants Council (RGC) of Hong Kong Special Administrative Region Government

Zitieren

APA

He, S., Yin, Z., Ding, Z., & Li, R. (2025). Particle morphology and principal stress direction dependent strength anisotropy through torsional shear testing. Canadian Geotechnical Journal, 62, 1-23. https://doi.org/10.1139/cgj-2023-0717

Vancouver

He S, Yin Z, Ding Z, Li R. Particle morphology and principal stress direction dependent strength anisotropy through torsional shear testing. Canadian Geotechnical Journal. 2025;62:1-23. doi:10.1139/cgj-2023-0717

BibTeX
@article{He2025,
  author = {He, Shao-Heng and Yin, Zhen-Yu and Ding, Zhi and Li, Rui-Dong},
  title = {Particle morphology and principal stress direction dependent strength anisotropy through torsional shear testing},
  journal = {Canadian Geotechnical Journal},
  year = {2025},
  volume = {62},
  pages = {1--23},
  doi = {10.1139/cgj-2023-0717}
}
Kostenlos starten →