EUVIMEDEUVIMED entdecken
Crossref

Study on strength damage model considering resistivity and failure characteristics of the frozen soil–rock mixture under different loading rates

Shuangjiao Wang, Zhiqing Li, Zhiao Gao, Zhiyu Qi, Kai Sun, Ruilin Hu, Yingxin Zhou

Canadian Geotechnical Journal · 01.09.2024 · 61 (9) · 1857-1872

DOI: 10.1139/cgj-2023-0283 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Canadian Geotechnical Journal, erschienen am 01.09.2024. Verfasst von Shuangjiao Wang und 6 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 41 Literaturangaben. Gefördert von: The Science and the Key Research and Development Plan of Yunnan Province, The National Natural Science Foundation of China, Second Tibetan Plateau Scientific Expedition and Research Program.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The strength damage and deformation failure of frozen soil–rock mixture (FSRM) often restrict the safety of the major engineering construction in cold areas or the spatial development of urban underground water-rich rock and soil masses. To investigate the uniaxial strength damage evolution and failure characteristics of FSRM under different loading rates (0.3, 0.6, 3, 6, 30, and 60 mm·min −1 ) in the quasi-static range, resistivity monitoring and image recognition technology were used to study the time-stress-volumetric strain-resistivity changes. The results indicate that the peak stress, peak strain, initial yield modulus, and tangential modulus of FSRM increase rapidly before increasing slowly as the loading rate increases, and there are critical loading rates and post-peak failure phenomenon. Three distinct types of failure modes, bulge failure, oblique shear failure, and fragmentation failure were observed at low (0.3–0.6 mm·min −1 ), medium (3–6 mm·min −1 ), and high loading rates (30–60 mm·min −1 ), respectively. The macroscopic failure of the FSRM at different loading rates arises from a combination of strain rate hardening of the strength and damage softening of the structure. To predict the stress-strain characteristics at various loading rates, a damage prediction model with a damage variable correction factor considering residual strength was employed based on the improved Duncan–Chang model and damage theory of electrical resistivity, and the predicted results were in good agreement with the experimental data.

Förderung

  • The Science and the Key Research and Development Plan of Yunnan Province
  • The National Natural Science Foundation of China
  • Second Tibetan Plateau Scientific Expedition and Research Program

Zitieren

APA

Wang, S., Li, Z., Gao, Z., Qi, Z., Sun, K., Hu, R., & Zhou, Y. (2024). Study on strength damage model considering resistivity and failure characteristics of the frozen soil–rock mixture under different loading rates. Canadian Geotechnical Journal, 61(9), 1857-1872. https://doi.org/10.1139/cgj-2023-0283

Vancouver

Wang S, Li Z, Gao Z, Qi Z, Sun K, Hu R, et al. Study on strength damage model considering resistivity and failure characteristics of the frozen soil–rock mixture under different loading rates. Canadian Geotechnical Journal. 2024;61(9):1857-1872. doi:10.1139/cgj-2023-0283

BibTeX
@article{Wang2024,
  author = {Wang, Shuangjiao and Li, Zhiqing and Gao, Zhiao and Qi, Zhiyu and Sun, Kai and Hu, Ruilin and Zhou, Yingxin},
  title = {Study on strength damage model considering resistivity and failure characteristics of the frozen soil–rock mixture under different loading rates},
  journal = {Canadian Geotechnical Journal},
  year = {2024},
  volume = {61},
  number = {9},
  pages = {1857--1872},
  doi = {10.1139/cgj-2023-0283}
}
Kostenlos starten →