EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Iron ore tailings stabilization with alternative alkali-activated cement for dry stacking: mechanical and microstructural insights

Helena Portela Farenzena, Giovani Jordi Bruschi, Guilherme Schmitt Medina, João Paulo de Sousa Silva, Andres Lotero, Nilo Cesar Consoli

Canadian Geotechnical Journal · 01.04.2024 · 61 (4) · 649-667

DOI: 10.1139/cgj-2023-0125 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Canadian Geotechnical Journal, erschienen am 01.04.2024. Verfasst von Helena Portela Farenzena und 5 weiteren Autor:innen. Die Arbeit wurde bisher 35-mal zitiert (Crossref) und nennt 107 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Conselho Nacional de Desenvolvimento Científico e Tecnológico.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Upstream tailings dams are high-risk structures that have experienced several failures worldwide, particularly with iron ore tailings (IOT). In this study, new disposal methods/techniques, such as cement-stabilized dry stacking, are discussed that provide enhanced mechanical behavior while reducing failure risks. Alkali-activated materials are used as cementing agents due to their mechanical and environmental advantages compared to ordinary Portland cement. This study evaluates the mechanical and microstructural behavior of IOT stabilized with an alkali-activated cement (AAC) composed of two by-products from the IOT beneficiation process, metakaolin and sodium silicate, tested under plane strain conditions. Simple shear tests and microstructural analysis were performed. Mixtures of IOT were produced with 0%, 1%, 3%, and 5% AAC to examine the influence of such variables on strength and deformability parameters under undrained conditions. The mixtures with 3% and 5% AAC showed the greatest impact on the strength; however, the addition of 1% AAC was able to reduce positive pore-pressure generation. Cementitious bounds were evidenced by forming a sodium aluminosilicate hydrate gel. The studied AAC was effective in stabilizing IOT, even at small contents.

Förderung

  • Conselho Nacional de Desenvolvimento Científico e Tecnológico

Zitieren

APA

Farenzena, H. P., Bruschi, G. J., Medina, G. S., Silva, J. P. D. S., Lotero, A., & Consoli, N. C. (2024). Iron ore tailings stabilization with alternative alkali-activated cement for dry stacking: mechanical and microstructural insights. Canadian Geotechnical Journal, 61(4), 649-667. https://doi.org/10.1139/cgj-2023-0125

Vancouver

Farenzena HP, Bruschi GJ, Medina GS, Silva JPDS, Lotero A, Consoli NC. Iron ore tailings stabilization with alternative alkali-activated cement for dry stacking: mechanical and microstructural insights. Canadian Geotechnical Journal. 2024;61(4):649-667. doi:10.1139/cgj-2023-0125

BibTeX
@article{Farenzena2024,
  author = {Farenzena, Helena Portela and Bruschi, Giovani Jordi and Medina, Guilherme Schmitt and Silva, João Paulo de Sousa and Lotero, Andres and Consoli, Nilo Cesar},
  title = {Iron ore tailings stabilization with alternative alkali-activated cement for dry stacking: mechanical and microstructural insights},
  journal = {Canadian Geotechnical Journal},
  year = {2024},
  volume = {61},
  number = {4},
  pages = {649--667},
  doi = {10.1139/cgj-2023-0125}
}
Kostenlos starten →