3D-printed digital pneumatic logic for the control of soft robotic actuators
Science Robotics · 31.01.2024 · 9 (86)
DOI: 10.1126/scirobotics.adh4060 ↗Kurz gefasst
Fachartikel in der Zeitschrift Science Robotics, erschienen am 31.01.2024. Verfasst von S Conrad und 7 weiteren Autor:innen. Beteiligte Einrichtung: Plant Biomechanics Group (PBG) Freiburg @ Botanic Garden of the University of Freiburg, Freiburg, Germany. Die Arbeit wurde bisher 100-mal zitiert (Crossref) und nennt 43 Literaturangaben.
Abstract (Originalsprache)
Soft robots are paving their way to catch up with the application range of metal-based machines and to occupy fields that are challenging for traditional machines. Pneumatic actuators play an important role in this development, allowing the construction of bioinspired motion systems. Pneumatic logic gates provide a powerful alternative for controlling pressure-activated soft robots, which are often controlled by metallic valves and electric circuits. Many existing approaches for fully compliant pneumatic control logic suffer from high manual effort and low pressure tolerance. In our work, we invented three-dimensional (3D) printable, pneumatic logic gates that perform Boolean operations and imitate electric circuits. Within 7 hours, a filament printer is able to produce a module that serves as an OR, AND, or NOT gate; the logic function is defined by the assigned input signals. The gate contains two alternately acting pneumatic valves, whose work principle is based on the interaction of pressurized chambers and a 3D-printed 1-millimeter tube inside. The gate design does not require any kind of support material for its hollow parts, which makes the modules ready to use directly after printing. Depending on the chosen material, the modules can operate on a pressure supply between 80 and more than 750 kilopascals. The capabilities of the invented gates were verified by implementing an electronics-free drink dispenser based on a pneumatic ring oscillator and a 1-bit memory. Their high compliance is demonstrated by driving a car over a fully flexible, 3D-printed robotic walker controlled by an integrated circuit.
Autor:innen und Institutionen
- Plant Biomechanics Group (PBG) Freiburg @ Botanic Garden of the University of Freiburg, Freiburg, Germany.
- Cluster of Excellence livMatS @ FIT-Freiburg Center for Interactive Materials and Bioinspired Technologies, University of Freiburg, Freiburg, Germany.
- Freiburg Center for Interactive Materials and Bioinspired Technologies (FIT), University of Freiburg, Freiburg, Germany.
ORCID-Profile: S Conrad, J Teichmann, P Auth, N Knorr, K Ulrich, F J Tauber
Zitieren
APA
Conrad, S., Teichmann, J., Auth, P., Knorr, N., Ulrich, K., Bellin, D., Speck, T., & Tauber, F. J. (2024). 3D-printed digital pneumatic logic for the control of soft robotic actuators. Science Robotics, 9(86). https://doi.org/10.1126/scirobotics.adh4060
Vancouver
Conrad S, Teichmann J, Auth P, Knorr N, Ulrich K, Bellin D, et al. 3D-printed digital pneumatic logic for the control of soft robotic actuators. Science Robotics. 2024;9(86). doi:10.1126/scirobotics.adh4060
BibTeX
@article{Conrad2024,
author = {Conrad, S and Teichmann, J and Auth, P and Knorr, N and Ulrich, K and Bellin, D and Speck, T and Tauber, F J},
title = {3D-printed digital pneumatic logic for the control of soft robotic actuators},
journal = {Science Robotics},
year = {2024},
volume = {9},
number = {86},
doi = {10.1126/scirobotics.adh4060}
}
EUVIMED