Electron injection and defect passivation for high-efficiency mesoporous perovskite solar cells
Science · 15.03.2024 · 383 (6688) · 1198-1204
DOI: 10.1126/science.adk9089 ↗Kurz gefasst
Fachartikel in der Zeitschrift Science, erschienen am 15.03.2024. Verfasst von Jiale Liu und 27 weiteren Autor:innen. Beteiligte Einrichtung: Michael Grätzel Center for Mesoscopic Solar Cells, Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuha…. Die Arbeit wurde bisher 285-mal zitiert (Crossref) und nennt 52 Literaturangaben.
Abstract (Originalsprache)
Printable mesoscopic perovskite solar cells (p-MPSCs) do not require the added hole-transport layer needed in traditional p-n junctions but have also exhibited lower power conversion efficiencies of about 19%. We performed device simulation and carrier dynamics analysis to design a p-MPSC with mesoporous layers of semiconducting titanium dioxide, insulating zirconium dioxide, and conducting carbon infiltrated with perovskite that enabled three-dimensional injection of photoexcited electrons into titanium dioxide for collection at a transparent conductor layer. Holes underwent long-distance diffusion toward the carbon back electrode, and this carrier separation reduced recombination at the back contact. Nonradiative recombination at the bulk titanium dioxide/perovskite interface was reduced by ammonium phosphate modification. The resulting p-MPSCs achieved a power conversion efficiency of 22.2% and maintained 97% of their initial efficiency after 750 hours of maximum power point tracking at 55 ± 5°C.
Autor:innen und Institutionen
- Michael Grätzel Center for Mesoscopic Solar Cells, Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuhan, Hubei 430074, P.R. China.
- WonderSolar Institute, Wuhan, Hubei 430074, P.R. China.
- State Key Laboratory of Molecular Reaction Dynamics, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian, Liaoning 116023, P.R. China.
- School of Chemistry, Xi'an Key Laboratory of Sustainable Energy Materials Chemistry, State Key Laboratory of Electrical Insulation and Power Equipment, Xi'an Jiaotong University, Xi'an, Shaanxi 710049, P.R. China.
- Huadian Electric Power Research Institute China Huadian Corporation, Hangzhou, Zhejiang 310058, P.R. China.
ORCID-Profile: Jiale Liu, Xiayan Chen, Kaizhong Chen, Wenming Tian, Yusong Sheng, Zexiong Qiu, Jing Leng, Yaqiong Su, Yinhua Zhou, Furi Ling, Anyi Mei, Hongwei Han
Zitieren
APA
Liu, J., Chen, X., Chen, K., Tian, W., Sheng, Y., She, B., Jiang, Y., Zhang, D., Liu, Y., Qi, J., Chen, K., Ma, Y., Qiu, Z., Wang, C., Yin, Y., Zhao, S., Leng, J., Jin, S., Zhao, W., …, & Han, H. (2024). Electron injection and defect passivation for high-efficiency mesoporous perovskite solar cells. Science, 383(6688), 1198-1204. https://doi.org/10.1126/science.adk9089
Vancouver
Liu J, Chen X, Chen K, Tian W, Sheng Y, She B, et al. Electron injection and defect passivation for high-efficiency mesoporous perovskite solar cells. Science. 2024;383(6688):1198-1204. doi:10.1126/science.adk9089
BibTeX
@article{Liu2024,
author = {Liu, Jiale and Chen, Xiayan and Chen, Kaizhong and Tian, Wenming and Sheng, Yusong and She, Bin and Jiang, Youyu and Zhang, Deyi and Liu, Yang and Qi, Jianhang and Chen, Kai and Ma, Yongmin and Qiu, Zexiong and Wang, Chaoyang and Yin, Yanfeng and Zhao, Shengli and Leng, Jing and Jin, Shengye and Zhao, Wenshan and Qin, Yanyang and Su, Yaqiong and Li, Xiaoyu and Li, Xiaojiang and Zhou, Yang and Zhou, Yinhua and Ling, Furi and Mei, Anyi and Han, Hongwei},
title = {Electron injection and defect passivation for high-efficiency mesoporous perovskite solar cells},
journal = {Science},
year = {2024},
volume = {383},
number = {6688},
pages = {1198--1204},
doi = {10.1126/science.adk9089}
}
EUVIMED