EUVIMEDEUVIMED entdecken
Crossref

Stabilized hole-selective layer for high-performance inverted p-i-n perovskite solar cells

Zhen Li iD, Xianglang Sun iD, Xiaopeng Zheng iD, Bo Li iD, Danpeng Gao iD, Shoufeng Zhang iD, Xin Wu, Shuai Li iD, Jianqiu Gong iD, Joseph M Luther iD, Zhong'an Li iD, Zonglong Zhu iD

Science · 20.10.2023 · 382 (6668) · 284-289

DOI: 10.1126/science.ade9637 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Science, erschienen am 20.10.2023. Verfasst von Zhen Li und 11 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemistry, City University of Hong Kong, Kowloon 999077, Hong Kong. Die Arbeit wurde bisher 911-mal zitiert (Crossref) und nennt 67 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

P-i-n geometry perovskite solar cells (PSCs) offer simplified fabrication, greater amenability to charge extraction layers, and low-temperature processing over n-i-p counterparts. Self-assembled monolayers (SAMs) can enhance the performance of p-i-n PSCs but ultrathin SAMs can be thermally unstable. We report a thermally robust hole-selective layer comprised of nickel oxide (NiO x ) nanoparticle film with a surface-anchored (4-(3,11-dimethoxy-7H-dibenzo[c,g]carbazol-7-yl)butyl)phosphonic acid (MeO-4PADBC) SAM that can improve and stabilize the NiO x /perovskite interface. The energetic alignment and favorable contact and binding between NiO x /MeO-4PADBC and perovskite reduced the voltage deficit of PSCs with various perovskite compositions and led to strong interface toughening effects under thermal stress. The resulting 1.53–electron-volt devices achieved 25.6% certified power conversion efficiency and maintained >90% of their initial efficiency after continuously operating at 65 degrees Celsius for 1200 hours under 1-sun illumination.

Autor:innen und Institutionen

  • Department of Chemistry, City University of Hong Kong, Kowloon 999077, Hong Kong.
  • State Key Laboratory of Materials Processing and Die & Mould Technology, Key Laboratory for Material Chemistry of Energy Conversion and Storage, Ministry of Education, School of Chemistry and Chemical Engineering, Huazh…
  • National Renewable Energy Laboratory, Golden, CO 80401, USA.
  • Center of Materials Science and Optoelectronics Engineering, College of Materials Science and Optoelectronic Technology, University of Chinese Academy of Science, Beijing, 100049, P.R. China.

ORCID-Profile: Zhen Li, Xianglang Sun, Xiaopeng Zheng, Bo Li, Danpeng Gao, Shoufeng Zhang, Shuai Li, Jianqiu Gong, Joseph M Luther, Zhong'an Li, Zonglong Zhu

Zitieren

APA

Li, Z., Sun, X., Zheng, X., Li, B., Gao, D., Zhang, S., Wu, X., Li, S., Gong, J., Luther, J. M., Li, Z., & Zhu, Z. (2023). Stabilized hole-selective layer for high-performance inverted p-i-n perovskite solar cells. Science, 382(6668), 284-289. https://doi.org/10.1126/science.ade9637

Vancouver

Li Z, Sun X, Zheng X, Li B, Gao D, Zhang S, et al. Stabilized hole-selective layer for high-performance inverted p-i-n perovskite solar cells. Science. 2023;382(6668):284-289. doi:10.1126/science.ade9637

BibTeX
@article{Li2023,
  author = {Li, Zhen and Sun, Xianglang and Zheng, Xiaopeng and Li, Bo and Gao, Danpeng and Zhang, Shoufeng and Wu, Xin and Li, Shuai and Gong, Jianqiu and Luther, Joseph M and Li, Zhong'an and Zhu, Zonglong},
  title = {Stabilized hole-selective layer for high-performance inverted p-i-n perovskite solar cells},
  journal = {Science},
  year = {2023},
  volume = {382},
  number = {6668},
  pages = {284--289},
  doi = {10.1126/science.ade9637}
}
Kostenlos starten →