Pigment removal from reverse-printed laminated flexible films by solvent-targeted recovery and precipitation
Science Advances · 14.03.2025 · 11 (11)
DOI: 10.1126/sciadv.adt5841 ↗Kurz gefasst
Fachartikel in der Zeitschrift Science Advances, erschienen am 14.03.2025. Verfasst von Tianwei Yan und 10 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical and Biological Engineering, University of Wisconsin-Madison, Madison, WI 53706, USA. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 58 Literaturangaben. Der Volltext ist frei in PubMed Central verfügbar.
Abstract (Originalsprache)
The solvent-targeted recovery and precipitation (STRAP) process separates and recovers the constituent resins in multilayer plastic packaging films by selective polymer dissolution. In this work, the cause of coloring in the STRAP-recycled polyethylene (PE) resins from postindustrial printed films was identified as decomposed diarylide pigments. Two different approaches are needed to completely remove the dissolved colorants during the STRAP process including (i) adding an activated carbon (AC) adsorbent to the solvent after polymer dissolution and (ii) proper mechanical filtration of the polymer-solvent cake to remove as much solvent from the cake as possible. Colorless recycled PE can be produced by a combination of the proposed approaches (choosing the proper solvent, adding an AC adsorbent, and doing proper mechanical filtration) with minimal accumulation of colorants in the recycled STRAP solvents. This study demonstrated that high-quality STRAP low-density PE can be obtained from printed plastic films, enhancing the potential circularity of these packaging materials.
Autor:innen und Institutionen
- Department of Chemical and Biological Engineering, University of Wisconsin-Madison, Madison, WI 53706, USA.
- Amcor, Neenah Innovation Center, Neenah, WI 54956, USA.
- Department of Mechanical Engineering, Michigan Technological University, Houghton, MI 49931, USA.
- Department of Chemistry, University of Wisconsin-Madison, Madison, WI 53706, USA.
ORCID-Profile: Tianwei Yan, Charles Granger, Kevin L Sánchez-Rivera, Panzheng Zhou, Steven Grey, Fei Long, Reid C Van Lehn, Styliani Avraamidou, George W Huber
Zitieren
APA
Yan, T., Granger, C., Sánchez-Rivera, K. L., Zhou, P., Grey, S., Nelson, K., Long, F., Bar-Ziv, E., Van Lehn, R. C., Avraamidou, S., & Huber, G. W. (2025). Pigment removal from reverse-printed laminated flexible films by solvent-targeted recovery and precipitation. Science Advances, 11(11). https://doi.org/10.1126/sciadv.adt5841
Vancouver
Yan T, Granger C, Sánchez-Rivera KL, Zhou P, Grey S, Nelson K, et al. Pigment removal from reverse-printed laminated flexible films by solvent-targeted recovery and precipitation. Science Advances. 2025;11(11). doi:10.1126/sciadv.adt5841
BibTeX
@article{Yan2025,
author = {Yan, Tianwei and Granger, Charles and Sánchez-Rivera, Kevin L and Zhou, Panzheng and Grey, Steven and Nelson, Kevin and Long, Fei and Bar-Ziv, Ezra and Van Lehn, Reid C and Avraamidou, Styliani and Huber, George W},
title = {Pigment removal from reverse-printed laminated flexible films by solvent-targeted recovery and precipitation},
journal = {Science Advances},
year = {2025},
volume = {11},
number = {11},
doi = {10.1126/sciadv.adt5841}
}
EUVIMED