Achieving room temperature plasticity in brittle ceramics through elevated temperature preloading
Science Advances · 19.04.2024 · 10 (16)
DOI: 10.1126/sciadv.adj4079 ↗Kurz gefasst
Fachartikel in der Zeitschrift Science Advances, erschienen am 19.04.2024. Verfasst von Chao Shen und 11 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Engineering, Purdue University, West Lafayette, IN 47907, USA. Die Arbeit wurde bisher 62-mal zitiert (Crossref) und nennt 92 Literaturangaben. Der Volltext ist frei in PubMed Central verfügbar.
Abstract (Originalsprache)
Ceramic materials with high strength and chemical inertness are widely used as engineering materials. However, the brittle nature limits their applications as fracture occurs before the onset of plastic yielding. There has been limited success despite extensive efforts to enhance the deformability of ceramics. Here we report a method for enhancing the room temperature plastic deformability of ceramics by artificially introducing abundant defects into the materials via preloading at elevated temperatures. After the preloading treatment, single crystal (SC) TiO 2 exhibited a substantial increase in deformability, achieving 10% strain at room temperature. SC α-Al 2 O 3 also showed plastic deformability, 6 to 7.5% strain, by using the preloading strategy. These preinjected defects enabled the plastic deformation process of the ceramics at room temperature. These findings suggest a great potential for defect engineering in achieving plasticity in ceramics at room temperature.
Autor:innen und Institutionen
- School of Materials Engineering, Purdue University, West Lafayette, IN 47907, USA.
- Institute of Special Environments Physical Sciences, Harbin Institute of Technology (Shenzhen), Shenzhen 518055, China.
- School of Materials Science and Engineering, Kumoh National Institute of Technology, Gumi, Gyeongbuk 39177, Republic of Korea.
- School of Electrical and Computer Engineering, Purdue University, West Lafayette, IN 47907, USA.
ORCID-Profile: Chao Shen, Tongjun Niu, Zhongxia Shang, Anyu Shang, R Edwin García, Haiyan Wang, Xinghang Zhang
Zitieren
APA
Shen, C., Li, J., Niu, T., Cho, J., Shang, Z., Zhang, Y., Shang, A., Yang, B., Xu, K., García, R. E., Wang, H., & Zhang, X. (2024). Achieving room temperature plasticity in brittle ceramics through elevated temperature preloading. Science Advances, 10(16). https://doi.org/10.1126/sciadv.adj4079
Vancouver
Shen C, Li J, Niu T, Cho J, Shang Z, Zhang Y, et al. Achieving room temperature plasticity in brittle ceramics through elevated temperature preloading. Science Advances. 2024;10(16). doi:10.1126/sciadv.adj4079
BibTeX
@article{Shen2024,
author = {Shen, Chao and Li, Jin and Niu, Tongjun and Cho, Jaehun and Shang, Zhongxia and Zhang, Yifan and Shang, Anyu and Yang, Bo and Xu, Ke and García, R Edwin and Wang, Haiyan and Zhang, Xinghang},
title = {Achieving room temperature plasticity in brittle ceramics through elevated temperature preloading},
journal = {Science Advances},
year = {2024},
volume = {10},
number = {16},
doi = {10.1126/sciadv.adj4079}
}
EUVIMED