EUVIMEDEUVIMED entdecken
Open Access

Wrap-like transfer printing for three-dimensional curvy electronics

Xingye Chen iD, Wei Jian iD, Zhijian Wang, Jun Ai, Yu Kang iD, Pengcheng Sun iD, Zhouheng Wang, Yinji Ma, Heling Wang iD, Ying Chen iD, Xue Feng iD

Science Advances · 28.07.2023 · 9 (30)

DOI: 10.1126/sciadv.adi0357 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Science Advances, erschienen am 28.07.2023. Verfasst von Xingye Chen und 10 weiteren Autor:innen. Beteiligte Einrichtung: Laboratory of Flexible Electronics Technology, Tsinghua University, Beijing 100084, China. Die Arbeit wurde bisher 85-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei in PubMed Central verfügbar.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Three-dimensional (3D) curvy electronics has wide-ranging application in biomedical health care, soft machine, and high-density curved imager. Limited by material properties, complex procedures, and coverage ability of existing fabrication techniques, the development of high-performance 3D curvy electronics remains challenging. Here, we propose an automated wrap-like transfer printing prototype for fabricating 3D curvy electronics. Assisted by a gentle and uniform pressure field, the prefabricated planar circuits on the petal-like stamp are integrated onto the target surface intactly with full coverage. The driving pressure for the wrapping is provided by the strain recovery of a prestrained elastic film triggered by the air pressure control. The wrapping configuration and strain distribution of the stamp are simulated by finite element analysis, and the pattern and thickness of the stamps are optimized. Demonstration of this strategy including spherical meander antenna, spherical light-emitting diode array, and spherical solar cell array illustrates its feasibility in the development of complex 3D curvy electronics.

Autor:innen und Institutionen

  • Laboratory of Flexible Electronics Technology, Tsinghua University, Beijing 100084, China.
  • Institute of Flexible Electronics Technology of THU, Zhejiang, Jiaxing 314000, China.
  • AML, Department of Engineering Mechanics, Tsinghua University, Beijing 100084, China.
  • School of Materials Science and Engineering, Tsinghua University, Beijing 100084, China.
  • Qiantang Science and Technology Innovation Center, Hangzhou 310016, China.

ORCID-Profile: Xingye Chen, Wei Jian, Yu Kang, Pengcheng Sun, Heling Wang, Ying Chen, Xue Feng

Zitieren

APA

Chen, X., Jian, W., Wang, Z., Ai, J., Kang, Y., Sun, P., Wang, Z., Ma, Y., Wang, H., Chen, Y., & Feng, X. (2023). Wrap-like transfer printing for three-dimensional curvy electronics. Science Advances, 9(30). https://doi.org/10.1126/sciadv.adi0357

Vancouver

Chen X, Jian W, Wang Z, Ai J, Kang Y, Sun P, et al. Wrap-like transfer printing for three-dimensional curvy electronics. Science Advances. 2023;9(30). doi:10.1126/sciadv.adi0357

BibTeX
@article{Chen2023,
  author = {Chen, Xingye and Jian, Wei and Wang, Zhijian and Ai, Jun and Kang, Yu and Sun, Pengcheng and Wang, Zhouheng and Ma, Yinji and Wang, Heling and Chen, Ying and Feng, Xue},
  title = {Wrap-like transfer printing for three-dimensional curvy electronics},
  journal = {Science Advances},
  year = {2023},
  volume = {9},
  number = {30},
  doi = {10.1126/sciadv.adi0357}
}
Kostenlos starten →