Viscosity prediction of an epoxy prepreg resin using a three-regime model incorporating isoconversional state diagrams
Journal of Rheology · 01.07.2026 · 70 (4) · 847-859
DOI: 10.1122/8.0001195 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Rheology, online erschienen am 01.06.2026. Verfasst von Qi Tao und 2 weiteren Autor:innen. Die Arbeit nennt 35 Literaturangaben. Gefördert von: Österreichische Forschungsförderungsgesellschaft, Austria Wirtschaftsservice, Austrian Federal Ministry of Economy, Energy and Tourism.
Abstract (Originalsprache)
Accurate prediction of viscosity profile during curing is critical for epoxy resin processing, particularly for lamination operations where flow behavior and cure development are strongly coupled. In this work, an isoconversional state diagram (ISD)-based viscosity modeling framework formulated within a three-regime model (TRM) is proposed to reconstruct the complete complex viscosity profile of a B-staged epoxy prepreg under constant heating rate nonisothermal and arbitrary heating conditions. The approach combines an Eyring-type description of melt-viscosity with an ISD-based representation of the curing-dominated regime, in which the extent of conversion is defined directly from characteristic complex viscosity points obtained from rheological measurements. The proposed framework yields physically bounded viscosity profiles that naturally terminate at a finite plateau corresponding to the fully cured state, without reliance on calorimetric input. The corrective effect in the ISD method stabilizes state-curve construction and mitigates distortions caused by experimental scatter. Validation using a commercial epoxy resin system demonstrates good agreement between predicted and measured complex viscosity curves under both constant heating rates and realistic press temperature profiles. A comparison between differential scanning calorimetry-based and rheology-based ISD constructions further illustrates the influence of conversion definition on predicted curing behavior. Overall, the proposed TRM-ISD framework provides a robust and process-relevant tool for complex viscosity prediction in epoxy resin systems.
Förderung
- Österreichische Forschungsförderungsgesellschaft
- Austria Wirtschaftsservice
- Austrian Federal Ministry of Economy, Energy and Tourism
- Austrian Federal Ministry of Innovation, Mobility and Infrastructure
Zitieren
APA
Tao, Q., Gramüller, M., & Krivec, T. (2026). Viscosity prediction of an epoxy prepreg resin using a three-regime model incorporating isoconversional state diagrams. Journal of Rheology, 70(4), 847-859. https://doi.org/10.1122/8.0001195
Vancouver
Tao Q, Gramüller M, Krivec T. Viscosity prediction of an epoxy prepreg resin using a three-regime model incorporating isoconversional state diagrams. Journal of Rheology. 2026;70(4):847-859. doi:10.1122/8.0001195
BibTeX
@article{Tao2026,
author = {Tao, Qi and Gramüller, Michael and Krivec, Thomas},
title = {Viscosity prediction of an epoxy prepreg resin using a three-regime model incorporating isoconversional state diagrams},
journal = {Journal of Rheology},
year = {2026},
volume = {70},
number = {4},
pages = {847--859},
doi = {10.1122/8.0001195}
}
EUVIMED