Measurements of underwater sound from rock drilling and chipping activities during anchor maintenance
The Journal of the Acoustical Society of America · 01.11.2026 · 160 (5) · 4112-4121
DOI: 10.1121/10.0047458 ↗Kurz gefasst
Fachartikel in der Zeitschrift The Journal of the Acoustical Society of America, online erschienen am 11.11.2026. Verfasst von Christopher Bassett. Beteiligte Einrichtung: Applied Physics Laboratory, University of Washington, Seattle, Washington 98105, USA. Die Arbeit nennt 26 Literaturangaben. Gefördert von: Naval Facilities Engineering Command Washington.
Abstract (Originalsprache)
Handheld hydraulic tools, including hammer drills and chipping hammers, are used in offshore construction. A hydrophone was used to measure underwater sound radiated by drilling and chipping hammers during anchor maintenance activities in Kaneohe Bay, Hawai'i. The recordings were used to calculate mean-square and zero-to-peak sound pressure levels, sound exposure levels, and to estimate acoustic source levels. Both tools had estimated source levels between 158 and 177 dB re 1 μPa-m with peak sound pressures of approximately 1.6 kPa at 10 m during the most intense periods of operation. The sound produced by both tools is highly percussive and intermittent with peak intensities in the 1–10 kHz band. Cumulative, unweighted sound exposure levels associated with both activities range from approximately 150 dB re 1 μPa2-s after 5 min to 160 dB re 1 μPa2-s or more after 40 min at a range of approximately 90 m. Although the most intense sound corresponding to the drilling and chipping activities results in modest (<8 dB) decreases in sound exposure levels for high-frequency hearing specialists, this same group is most likely to experience temporary or permanent threshold shifts because of these activities given their lower onset thresholds.
Autor:innen und Institutionen
- Applied Physics Laboratory, University of Washington, Seattle, Washington 98105, USA.
ORCID-Profile: Christopher Bassett
Förderung
- Naval Facilities Engineering Command Washington
Zitieren
APA
Bassett, C. (2026). Measurements of underwater sound from rock drilling and chipping activities during anchor maintenance. The Journal of the Acoustical Society of America, 160(5), 4112-4121. https://doi.org/10.1121/10.0047458
Vancouver
Bassett C. Measurements of underwater sound from rock drilling and chipping activities during anchor maintenance. The Journal of the Acoustical Society of America. 2026;160(5):4112-4121. doi:10.1121/10.0047458
BibTeX
@article{Bassett2026,
author = {Bassett, Christopher},
title = {Measurements of underwater sound from rock drilling and chipping activities during anchor maintenance},
journal = {The Journal of the Acoustical Society of America},
year = {2026},
volume = {160},
number = {5},
pages = {4112--4121},
doi = {10.1121/10.0047458}
}
EUVIMED