EUVIMEDEUVIMED entdecken
Crossref

FE analysis of acoustic metamaterials created with 3-D printer

Yoshio Kurosawa

The Journal of the Acoustical Society of America · 01.10.2025 · 158 (4_Supplement) · A256-A256

DOI: 10.1121/10.0040803 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The Journal of the Acoustical Society of America, erschienen am 01.10.2025. Verfasst von Yoshio Kurosawa.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Urethane foam is generally used to reduce noise in automobiles, houses, home appliances, etc. Urethane foam for sound absorption consists of a wall (skeleton) and a cavity (air), and the cavities are connected by holes in the wall, but the structure is very complicated. Generally, the Biot–Allard model is used when calculating the sound absorption characteristics, but the parameters used in the calculation are unlikely to lead to actual material development. Therefore, using a 3-D printer (ProJet MJP 5500X-E manufactured by 3D Systems), we created a model with a simple structure of urethane foam. Create multiple types of shaped objects with spherical cavities with a diameter of several millimeters connected by small cylindrical holes with different sphere diameters and cylinder diameters, and use an acoustic tube to determine the vertical incident sound absorption coefficient (hereinafter referred to as sound absorption coefficient). It was measured. We also created an FE model with the same shape and calculated the sound absorption coefficient. We will introduce the knowledge obtained by the measurement and the comparison between the measurement result and the calculation result. In addition, a parametric study of the skeleton and holes was conducted to investigate their impact on sound absorption rates.

Zitieren

APA

Kurosawa, Y. (2025). FE analysis of acoustic metamaterials created with 3-D printer. The Journal of the Acoustical Society of America, 158(4_Supplement), A256-A256. https://doi.org/10.1121/10.0040803

Vancouver

Kurosawa Y. FE analysis of acoustic metamaterials created with 3-D printer. The Journal of the Acoustical Society of America. 2025;158(4_Supplement):A256-A256. doi:10.1121/10.0040803

BibTeX
@article{Kurosawa2025,
  author = {Kurosawa, Yoshio},
  title = {FE analysis of acoustic metamaterials created with 3-D printer},
  journal = {The Journal of the Acoustical Society of America},
  year = {2025},
  volume = {158},
  number = {4_Supplement},
  pages = {A256--A256},
  doi = {10.1121/10.0040803}
}
Kostenlos starten →