EUVIMEDEUVIMED entdecken
Crossref

Bridging the gap between annular and can-annular acoustic spectra

Tiemo Pedergnana iD, Alessandro Orchini, Jonas Moeck, Nicolas Noiray iD

The Journal of the Acoustical Society of America · 01.03.2024 · 155 (3) · 2192-2198

DOI: 10.1121/10.0025383 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The Journal of the Acoustical Society of America, online erschienen am 22.03.2024. Verfasst von Tiemo Pedergnana und 3 weiteren Autor:innen. Beteiligte Einrichtung: CAPS Laboratory, Department of Mechanical and Process Engineering, ETH Zürich, Zürich, Zürich 8092, Switzerland. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 26 Literaturangaben. Gefördert von: Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung, Deutsche Forschungsgemeinschaft.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the literature on thermoacoustic instabilities in combustors, a distinction is typically made between annular and can-annular systems because these are the most common gas turbine architectures. In reality, however, annular combustors typically feature discretely symmetric elements, such as burner tubes, and can-annular combustors feature an azimuthally symmetric plenum at the turbine inlet. To better understand the general case in between the annular and can-annular extremes, we analyze the acoustic spectrum of an idealized can-annular combustion chamber with variable geometry, where the length of the axial gap distance beyond the ends of the cans—hence, the coupling strength—may be adjusted. For small gap sizes, the geometry approaches a set of isolated combustor cans, whereas for large gap sizes, it approaches that of pure annular systems. We present two theoretical models based on Bloch wave theory and validate them against finite-element simulations of the Helmholtz equation. We demonstrate that the azimuthal modes transform into the eigenmodes of an annular chamber as the gap is fully opened, and we show that below a certain frequency, all the modes in between the can-annular and annular limits can be classified by their axial and azimuthal mode orders.

Autor:innen und Institutionen

  • CAPS Laboratory, Department of Mechanical and Process Engineering, ETH Zürich, Zürich, Zürich 8092, Switzerland.
  • Chair of Nonlinear Thermo-Fluid Mechanics, Institute of Fluid Dynamics and Technical Acoustics, TU Berlin, Berlin 10623, Germany.
  • Department of Energy and Process Engineering, NTNU Trondheim, Trondheim 7491, Norway.

ORCID-Profile: Tiemo Pedergnana, Nicolas Noiray

Förderung

  • Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung
  • Deutsche Forschungsgemeinschaft

Zitieren

APA

Pedergnana, T., Orchini, A., Moeck, J., & Noiray, N. (2024). Bridging the gap between annular and can-annular acoustic spectra. The Journal of the Acoustical Society of America, 155(3), 2192-2198. https://doi.org/10.1121/10.0025383

Vancouver

Pedergnana T, Orchini A, Moeck J, Noiray N. Bridging the gap between annular and can-annular acoustic spectra. The Journal of the Acoustical Society of America. 2024;155(3):2192-2198. doi:10.1121/10.0025383

BibTeX
@article{Pedergnana2024,
  author = {Pedergnana, Tiemo and Orchini, Alessandro and Moeck, Jonas and Noiray, Nicolas},
  title = {Bridging the gap between annular and can-annular acoustic spectra},
  journal = {The Journal of the Acoustical Society of America},
  year = {2024},
  volume = {155},
  number = {3},
  pages = {2192--2198},
  doi = {10.1121/10.0025383}
}
Kostenlos starten →