EUVIMEDEUVIMED entdecken
Crossref

Exploring C4F6-BCl3 gas mixtures for Bosch deep-Si etch processes and understanding sidewall passivation mechanisms

Richa Agrawal, Nathan Marchack, Steve Molis, Marinus Hopstaken, Rosa Goss, Robert L. Bruce

Journal of Vacuum Science & Technology A · 01.01.2027 · 45 (1)

DOI: 10.1116/6.0005878 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Vacuum Science & Technology A, online erschienen am 20.11.2026. Verfasst von Richa Agrawal und 5 weiteren Autor:innen. Die Arbeit nennt 46 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Bosch processes involving C4F8 and SF6 have been conventionally used for through-silicon via (TSV) etch. Given the high global warming potential (GWP) of C4F8 and the increasing importance of deep-Si etch processes for packaging applications in future technology nodes, it is of great interest to investigate alternative plasma chemistries to focus on sustainability in future process development. Given its lower GWP and lower F:C content, C4F6 presents an attractive alternative candidate to C4F8. However, the generation of C–Fx species upon C4F6 dissociation may still constitute as per- and polyfluoroalkyl substances (PFASs) by-products and pose concerns for exhaust emissions and abatement treatments. In our previous works, BCl3 was explored as an additive for single-step deep-Si etch feasibility, and here, we have extended the application of C4F6-BCl3 admixtures as passivants to cyclic Bosch processes. Very interestingly, gas-phase analyses by optical emission spectroscopy revealed substantial suppression of C–Fx and C2 peaks upon BCl3 addition compared to pure C4F6 discharges. BCl3 addition also showed enhancement in the vertical etch rate and superior anisotropy, and process parametric studies showed Si etch rates >4.5 μm/min for depths exceeding 75 μm at aspect ratios higher than 15:1. X-ray photoelectron spectroscopy and time-of-flight secondary-ion mass spectrometry investigation carried out on the sidewall polymer films further corroborated almost complete substitution of F with Cl upon BCl3 addition. Sidewall passivation composition modulation with C4F6-BCl3 mixtures, therefore, presents a viable route to reduce the environmental effects of PFAS by-products while improving etch performance and maintaining fidelity of TSV structures.

Zitieren

APA

Agrawal, R., Marchack, N., Molis, S., Hopstaken, M., Goss, R., & Bruce, R. L. (2027). Exploring C4F6-BCl3 gas mixtures for Bosch deep-Si etch processes and understanding sidewall passivation mechanisms. Journal of Vacuum Science & Technology A, 45(1). https://doi.org/10.1116/6.0005878

Vancouver

Agrawal R, Marchack N, Molis S, Hopstaken M, Goss R, Bruce RL. Exploring C4F6-BCl3 gas mixtures for Bosch deep-Si etch processes and understanding sidewall passivation mechanisms. Journal of Vacuum Science & Technology A. 2027;45(1). doi:10.1116/6.0005878

BibTeX
@article{Agrawal2027,
  author = {Agrawal, Richa and Marchack, Nathan and Molis, Steve and Hopstaken, Marinus and Goss, Rosa and Bruce, Robert L.},
  title = {Exploring C4F6-BCl3 gas mixtures for Bosch deep-Si etch processes and understanding sidewall passivation mechanisms},
  journal = {Journal of Vacuum Science & Technology A},
  year = {2027},
  volume = {45},
  number = {1},
  doi = {10.1116/6.0005878}
}
Kostenlos starten →