Magnetic circuit design and magnetic field uniformity optimization of a magnetron sputtering system for large-size inclined substrates
Journal of Vacuum Science & Technology B · 01.12.2026 · 44 (6)
DOI: 10.1116/6.0005869 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Vacuum Science & Technology B, online erschienen am 12.11.2026. Verfasst von Le Huang und 4 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Scientific Research Foundation of Hunan Provincial Education Department, Department of Science and Technology of Hunan Province.
Abstract (Originalsprache)
The fast-growing display industry demands coatings on increasingly large glass substrates. Conventional vertical magnetron sputtering requires a substrate carrier, which raises equipment cost and wastes material in carrier-covered regions. A carrier-free inclined-substrate configuration (85° inclination), therefore, offers higher material utilization and lower cost. This work presents the magnetic-circuit design and field-uniformity optimization of a large-area rectangular magnetron sputtering target for such substrates. The magnetic flux density between the target and the substrate is obtained from an analytical magnetic-charge integration model and compared with 3D magnetostatic COMSOL simulations using the “Magnetic Fields, No Currents” interface for N42 NdFeB magnets (1.3 T remanence). The straight section is optimized parametrically through flux-concentrating/guiding structures and magnet dimensions, and the end region is evaluated across four configurations. The adopted end design (a semicircular inner strip plus a semitoroidal outer ring) reduces the maximum curve separation Sm—the maximum lateral distance between the end-region and straight-section field curves—from 143 to 12.5 mm (a 91.3% reduction), while the peak horizontal flux density, measured at the cathode-sheath height along the erosion-zone centerline, changes from 58.3 to 54.7 mT. The 54.7 mT peak lies marginally above the 30–50 mT engineering target range and should be brought back into the interval in a subsequent refinement. This is a computational study; the predicted fields and the anticipated process benefits require experimental validation.
Förderung
- Scientific Research Foundation of Hunan Provincial Education Department
- Department of Science and Technology of Hunan Province
Zitieren
APA
Huang, L., Zhao, Q., Hu, C., Wang, X., & Peng, Y. (2026). Magnetic circuit design and magnetic field uniformity optimization of a magnetron sputtering system for large-size inclined substrates. Journal of Vacuum Science & Technology B, 44(6). https://doi.org/10.1116/6.0005869
Vancouver
Huang L, Zhao Q, Hu C, Wang X, Peng Y. Magnetic circuit design and magnetic field uniformity optimization of a magnetron sputtering system for large-size inclined substrates. Journal of Vacuum Science & Technology B. 2026;44(6). doi:10.1116/6.0005869
BibTeX
@article{Huang2026,
author = {Huang, Le and Zhao, Qiancheng and Hu, Congfang and Wang, Xian and Peng, Yuxuan},
title = {Magnetic circuit design and magnetic field uniformity optimization of a magnetron sputtering system for large-size inclined substrates},
journal = {Journal of Vacuum Science & Technology B},
year = {2026},
volume = {44},
number = {6},
doi = {10.1116/6.0005869}
}
EUVIMED